Fuse holders
Filter layout:
|
| MPN | Article | Brand | In stock | Price | Discounts | Quantity | Description | Weight g. | Working voltage, V | Mounting type | Factory packaging | Working current, A |
|---|
Fuse holder 5x20mm (contact)
#11853
|
24105 | Tian | 446 шт |
0.60 грн.
|
|
Fuse holder 5x20mm for soldering into the board. | 0.3 | — | DIP | 2000pcs | — | ||||||||||
Fuse holder PPT10 220V 10A
#14276
|
26475 | СНГ | 112 шт |
20 грн.
|
|
PPT-10 are used with the following fusible tubular porcelain inserts: VTF-6A, VTF-10A. | 34 | 220 | Screw | 135pcs | 10 | ||||||||||
| 26729 | СНГ | 61 шт |
25 грн.
|
|
DP-3TsM (=DP-3M) fuse holder 5x20mm, with the possibility of switching three voltages. | 9.2 | — | DIP | 100 pieces. | — | |||||||||||
| 21328 | СНГ | 11 шт |
6 грн.
|
|
The MDP1-1 fuse holder is designed to operate in electrical networks with voltage up to 250 V DC and AC up to 2 A in general industrial and special-purpose equipment. Specifications: Technical parameters of fuse holder MDP1-1: • Operating voltage, V ...... 250 • Rated current, A ...... 2 • Contact resistance, no more than, Ohm ...... 0.01 • Operating temperature range, °С ...... from -60 to +85 • Minimum time to failure, h ...... not less than 10000 • Mounting method ...... screws • Overall dimensions (diameter x length), mm ...... 18.5x26 • Mass, g ...... 5.3 | 5.3 | 250 | Screw | 100 pieces. | 2 | |||||||||||
DVP4-3, Fuse holder
#670
|
28871 | СНГ | — |
15 грн.
|
|
— | The fusible insert holder DVP4-3 is designed for installation of a fusible insert with a diameter of 7.2 and a length of 30 millimeters in order to protect equipment from overload and short circuit currents. Main technical and operational characteristics of the fusible insert holder DVP4-3: ● Maximum operating current ...... 10 A; ● Maximum operating voltage ...... 250 V; ● Permissible current frequency ...... 50-2000 Hz; ● Contact resistance, no more than ...... 0.005 Ohm; ● Electrical insulation strength ...... 1500 V; ● Insulation resistance, not less than ...... 1000 MOhm; ● Contact pressing force, not less than ...... 11.8 N: ● Cross-section of connected wires ...... 2.5 mm; ● Increased operating temperature ...... 100 °C; ● Reduced operating temperature...... minus 60 °C; ● Warranty period from the date of manufacture, not less than ...... 15 years; ● Warranty operating time during the warranty period is not less than ...... 15,000 hours; ● Number of changes of fuse links ...... 400. | 16 | — | DIP | 100 pieces. | — | |||||||||
| 23605 | СНГ | — |
20 грн.
|
|
— | Insert length - 30 mm. Rated current - 10 A. Rated voltage - 250 V. | 17 | — | DIP | 50pcs | — | ||||||||||
| 24106 | Tian | — |
2 грн.
|
|
— | For fuse 5x20mm, brass alloy contacts. | 0.8 | — | DIP | 500pcs | — | ||||||||||
| 24107 | Tian | — |
2.50 грн.
|
|
— | For fuse 5x20mm, brass alloy contacts with cover. | 1.8 | — | DIP | 500pcs | — | ||||||||||
Fuse holder 5x20mm with wire
#11856
|
24108 | Tian | — |
5 грн.
|
|
— | For fuse 5x20mm with looped wire, length 200mm. | 3.5 | — | DIP | 100 pieces. | — | |||||||||
| 24109 | Tian | — |
7 грн.
|
|
— | For fuse 5x20mm; hole in the device 12mm; bottom nut, plastic washers (similar to DVP4-2). Case material is Bakelite. Contacts 10A 250V AC. Threaded cap. | 5.2 | — | DIP | 200pcs | — | ||||||||||
Fuse holder 6x30mm (=DVP4-3)
#11858
|
24110 | Tian | — |
10 грн.
|
|
— | For fuse 6x30mm; hole in the device 14mm (similar to DVP4-3). Case material is Bakelite. Contacts 10A 250V AC. Threaded cap. | 10.2 | — | DIP | 100 pieces. | — | |||||||||
Fuse holder PRS-25 380V 20A
#14155
|
26349 | СНГ | — |
38 грн.
|
|
— | Fuse holder PRS-25 380V 20A complete with fusible link PVD 20A. | 230 | 380 | — | 10 pieces. | 20 | |||||||||
| 26730 | СНГ | — |
15 грн.
|
|
— | The fusible insert holder DVP7 is designed to work in electrical networks with voltage up to 250V DC and AC. | 17.5 | — | DIP | 200pcs | — |
