Passive radio components
- Capacitors
- Circuit breakers
- Resistors
- Quartz, filters
- Cable markers
- Relays, contactors
- Connectors
- Switches, buttons
- Transformers, inductive components
- Shunts
- Varistors
- Panels
- Dischargers
| MPN | Article | Brand | In stock | Price | Discounts | Quantity | Description | Weight g. | Pin type | Working voltage, V | Case diameter D, mm | Body length L, mm | Mounting type | Factory packaging | Capacity | Resistance | Resistor power | Accuracy | Resistor housing type | Curve | Working current, A | Material | Number of windings | Polarization | Operating current no more | Maximum switching voltage | Winding supply current | Capacity min., PF | Plug or socket | Capacity max., PF | Number of contacts | Mechanical installation | Type | Contact set |
|---|
| 21200 | KLS | — |
18 грн.
|
|
— | Double, 6 pins, straight, curve B, stem 20 mm. | 10 | — | — | — | — | DIP | 100 pieces. | — | 50 кОм | 0.125 W | — | — | B | — | — | — | — | — | — | — | — | — | — | — | — | — | — | ||||||||||
| — | KLS | — |
18 грн.
|
|
— | Double, 6 pins, straight, curve B | 10 | — | — | — | — | DIP | 100 pieces. | — | 68 кОм | 0.125 W | — | — | B | — | — | — | — | — | — | — | — | — | — | — | — | — | — | ||||||||||
| — | KLS | — |
18 грн.
|
|
— | Double, 6 pins, straight, curve B | 10 | — | — | — | — | DIP | 100 pieces. | — | 150 кОм | 0.125 W | — | — | B | — | — | — | — | — | — | — | — | — | — | — | — | — | — | ||||||||||
| — | KLS | — |
18 грн.
|
|
— | Double, 6 pins, straight, curve B | 10 | — | — | — | — | DIP | 100 pieces. | — | 200 кОм | 0.125 W | — | — | B | — | — | — | — | — | — | — | — | — | — | — | — | — | — | ||||||||||
| — | KLS | — |
18 грн.
|
|
— | Double, 6 pins, straight, curve B | 10 | — | — | — | — | DIP | 100 pieces. | — | 300 кОм | 0.125 W | — | — | B | — | — | — | — | — | — | — | — | — | — | — | — | — | — | ||||||||||
| 20934 | CHINA | — |
29 грн.
|
|
— | HR911105A is Hanrun's low cost Ethernet connector designed for use in network interface cards. HR911105A complies with IEEE802.3 standard including 350uH OCL with 8m ADC. It has high noise immunity against electromagnetic interference, crosstalk, reflected signal and static electricity. The insulation strength is at least 1500 V, according to the requirements of the IEEE802.3 standard. Installation requires minimal PCB area and simple wiring. Provides a reduction in the number of magnetic components on the printed circuit board. | — | — | — | — | — | DIP | 50pcs | — | — | — | — | — | — | — | — | — | — | — | — | — | — | Socket | — | 8 | For a fee | RJ45 | — | ||||||||||
| 21044 | Jietong Switch | — |
8 грн.
|
|
— | Function: push button switch Button color: blue Without fixation Backlight: no Number of pins: 2pin Operation algorithm: off/on Operating voltage: 250V Working current: 1A. | 3.7 | — | — | — | — | DIP | 500pcs | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | ||||||||||
| 22423 | CHINA | — |
27.50 грн.
|
|
— | — | 7 | Flexible Leads | — | — | — | DIP | 50pcs | — | 30 Ом | 20 W | 5 % | ceramic | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | ||||||||||
| 21361 | CHINA | — |
1 грн.
|
— | CL11 (PEI) - polystyrene capacitors of inductive type with a fire-retardant epoxy coating of the body. | 0.3 | Flexible Leads | 100 | — | — | DIP | 500pcs | 10nF (0.01µF) | — | — | 10 % | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||
| 21362 | CHINA | — |
4 грн.
|
— | CL21 (MEF) - metal-film capacitors of non-inductive type with a sealed fire-retardant epoxy coating of the housing (it is possible to use as a replacement for K73-17 for DC circuits). | 1.5 | Flexible Leads | 400 | — | — | DIP | 500pcs | 220nF (0.22µF) | — | — | 10 % | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||
| 21364 | CHINA | — |
3 грн.
|
— | CL21 (MEF) - metal-film capacitors of non-inductive type with a sealed fire-retardant epoxy coating of the housing (it is possible to use as a replacement for K73-17 for DC circuits). | 0.6 | Flexible Leads | 63 | — | — | DIP | 1000pcs | 100nF (0.1µF) | — | — | 10 % | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||
| 21412 | СНГ | — |
8 грн.
|
— | Ceramic tuning capacitors KT4-25 are designed for operation in DC and AC circuits and in pulsed modes. Produced in a constructive version for printed circuits with solder fastening by leads. | 0.8 | hard conclusions | 250 | — | — | DIP | 200pcs | — | — | — | — | — | — | — | — | — | — | — | — | — | 2 | — | 10 | — | — | — | — | |||||||||||
DB-9F connector
#9837
|
21444 | CHINA | — |
4 грн.
|
|
— | D-SUB socket on cable (computer interface) 2-row, 9 pins | 5.2 | — | — | — | — | DIP | 500pcs | — | — | — | — | — | — | — | — | — | — | — | — | — | — | Socket | — | 9 | To the body | D-SUB | — | |||||||||
| 21445 | СНГ | — |
21 грн.
|
|
— | Resistors SP5-24 variable tuning wire for surface mounting. Single-element, multi-turn, with rectilinear movement of the movable system. Are intended for work in chains of direct, alternating and impulse currents. A number of nominal resistances - E6. The main technical characteristics of resistors SP5-24: - Nominal resistance range: 100 Ohm... 47 kOhm - Rated power: 1W - Permissible resistance deviations: ±5; ±10 - Temperature range: -60... +125 °С | 2.8 | Flexible Leads | — | — | — | DIP | 10 pieces. | — | 150 Ом | 1 W | 5 % | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | ||||||||||
| 21446 | СНГ | — |
21 грн.
|
|
— | Resistors SP5-2VB variable tuning wire for printed wiring. Square micro-turn (40 revolutions from minimum to maximum), with a circular movement of the movable contact system, produced by a worm pair. Are intended for work in chains of direct, alternating and impulse currents. A number of nominal resistances - E6. The main technical characteristics of resistors SP5-2VB: - Nominal resistance range: 3.3 Ohm ... 22 kOhm - Rated power: 0.5W - Permissible resistance deviations: ±5; ±10% - Temperature range: -60... +70 °C | 1.1 | hard conclusions | — | — | — | DIP | 10 pieces. | — | 1 кОм | 0.5 W | 5 % | — | A | — | — | — | — | — | — | — | — | — | — | — | — | — | — | ||||||||||
| 21447 | СНГ | — |
15 грн.
|
|
— | Resistors SP5-16VV variable trimming wire for printed wiring. Cylindrical, single single turn, with circular movement of the movable contact system, without stops. Are intended for work in chains of direct, alternating and impulse currents. A number of nominal resistances - E6. The main technical characteristics of resistors SP5-16VV: - Nominal resistance range: 100... 6800 Ohm - Rated power: 0.125W - Limit voltage: 29 V - Permissible resistance deviations: ±5; ±10% - Temperature range: -60... +70 °C - Functional characteristic: A | 0.6 | hard conclusions | — | — | — | DIP | — | — | 680 Ом | 0.125 W | 5 % | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | ||||||||||
| 21449 | СНГ | — |
65 грн.
|
|
— | The SSHR32P10EG4N cylindrical low-frequency leaky connector is designed for operation in DC and AC electrical circuits with a frequency of up to 3 MHz and a voltage of up to 850 V. Connectors consist of two parts: plugs and sockets. Plugs and sockets can be both block (instrument) and cable. The block part of the connectors is made without spigots, the cable part with a straight or angled spigot. The joint of the connectors is threaded, the polarization of the cases is single-key. Covering of contacts ― silver. Mounting method - soldering. SShR connectors are manufactured for internal installation in UHL version in accordance with technical specifications ASLR.434410.019 TU (AShDK.434410.079 TU). Main technical characteristics of SSHR32P10EG4N: ― Resistance of contacts..... no more than 1,3 mOhm ― Resistance of isolation..... not less than 5000 MΩ ― The maximum current loading on single contact..... 35 And ― Number of joints-dismemberments ..... 500 ― Interval of working temperatures..... from-60 to +70 °C ― The minimum operating time..... 1000 hours | 90 | — | — | — | — | DIP | 20pcs | — | — | — | — | — | — | — | — | — | — | — | — | — | — | Fork | — | 10 | per wire | ShR | — | ||||||||||
RS50BTV connector
#9845
|
21452 | СНГ | — |
38 грн.
|
|
— | Designed for operation in electric circuits of direct, alternating (frequency up to 3 MHz) and pulsed currents. | 22 | — | — | — | — | DIP | 50pcs | — | — | — | — | — | — | — | — | — | — | — | — | — | — | Socket | — | 50 | To the body | RS | — | |||||||||
RSH2N-1-6 connector
#9847
|
21454 | СНГ | — |
30 грн.
|
|
— | RSH2N-1-6 volumetric mounting connectors are designed for operation in DC, AC (frequency up to 3 MHz) and pulsed current circuits with voltage up to 400 V. | 3 | — | — | — | — | DIP | 100 pieces. | — | — | — | — | — | — | — | — | — | — | — | — | — | — | Fork | — | 4 | per wire | RSH | — | |||||||||
Connector ShR28P4NSh5
#9848
|
21455 | СНГ | — |
55 грн.
|
|
— | The ShR28P4NSh5 cylindrical low-frequency connector is designed for operation in electric circuits of direct and alternating currents with a frequency of up to 3 MHz at a voltage of up to 850 V. | 90 | — | — | — | — | DIP | 20pcs | — | — | — | — | — | — | — | — | — | — | — | — | — | — | Socket | — | 4 | per wire | ShR | — | |||||||||
| 21456 | СНГ | — |
95 грн.
|
|
— | Designed for operation in electrical circuits of direct and alternating (frequency up to 3 MHz) currents at voltages up to 850 V (peak value). | 180 | — | — | — | — | DIP | 1 PC. | — | — | — | — | — | — | — | — | — | — | — | — | — | — | Fork | — | 26 | per wire | ShR | — | ||||||||||
Fuse PK45, 1A, 600V
#9860
|
21639 | СНГ | — |
3 грн.
|
|
— | Fuses (fusible inserts) are designed to break the electrical circuit if the current in the circuit exceeds the specified one. | 1 | — | 600 | 7 | 45 | DIP | 200pcs | — | — | — | — | — | — | 1 | Glass | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||
RP21-block-screw(pl)-003
#9880
|
21660 | — | — |
25 грн.
|
— | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | ||||||||||
| 21661 | СНГ | — |
65 грн.
|
— | 4 closing. Contact current: 6A Rated voltage: ~220V | 63 | — | 220 | — | — | DIP | 5 pieces. | — | — | — | — | — | — | 6 | — | 1 | neutral | 0.4A | 500v | Variable | — | — | — | — | — | — | 4 short circuit | |||||||||||
Switch P2P1T-1ZhV
#9883
|
23818 | СНГ | — |
56 грн.
|
|
— | P2P1T-1ZhV pushbutton switches are designed for switching DC and AC electrical circuits in electronic equipment. Without fixation. Two switching groups of contacts. Climatic modification B. The light element used in the switches is a miniature incandescent lamp type CM-28-0.05-1 ITLYu.675100.001 TU (supply voltage 28 V - not included in the product). Switches are made with buttons of five colors: - white (the presence of the letter "b" in the designation); - yellow (the presence of the letter "g" in the designation); - green (the presence of the letter "z" in the designation); - blue (the presence of the letter "c" in the designation); - red (the presence of the letter "k" in the designation). Specifications: - AG0.360.410 TU - products with acceptance "OTK" - OYu0.360.034 TU - products with acceptance "VP" Symbol when ordering Switch P2P1T-1ZhV AG0.360.410 TU, where - P2P1T-1 - designation of the type rating of the push-button switch, and the first digit indicates the number of microswitches in the switch, the second - the number of signal lamps); - the letter b - after the hyphen - a variant of the color of the button (light field) of the switch (b, g, h, s or k; see above); - letter B – climatic version B; - AG0.360.410 TU - number of technical specifications (AG0.360.410TU - products with acceptance "SKK", OYu0.360.034TU - products of quality category "VP") | 50 | — | — | — | — | DIP | 17pcs | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||
| 21667 | СНГ | — |
5 грн.
|
— | Capacitors film sealed polyethylene terephthalate. Are issued in the metal case. Are intended for work in chains of direct, alternating and pulsating currents. | 8 | Flexible Leads | 160 | — | — | DIP | 90pcs | 1µF | — | — | 20 % | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||
| 21700 | СНГ | — |
6 грн.
|
— | K73-17 polyethylene terephthalate protected capacitors. Designed for the operation of built-in elements inside complete products in DC, AC circuits and in a pulsed mode. | 2.8 | Flexible Leads | 630 | — | — | DIP | 50pcs | 100nF (0.1µF) | — | — | 10 % | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||
| 21703 | СНГ | — |
4 грн.
|
— | K73-17 polyethylene terephthalate protected capacitors. Designed for the operation of built-in elements inside complete products in DC, AC circuits and in a pulsed mode. | 0.9 | Flexible Leads | 63 | — | — | DIP | 400pcs | 330nF (0.33µF) | — | — | 10 % | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||
| 21704 | СНГ | — |
8 грн.
|
— | K73-17 polyethylene terephthalate protected capacitors. Designed for the operation of built-in elements inside complete products in DC, AC circuits and in a pulsed mode. | 4.5 | Flexible Leads | 63 | — | — | DIP | 50pcs | 3.3µF | — | — | 10 % | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||
| 21713 | Nenshi Communication | — |
13 грн.
|
|
— | Provides additional electrical surge protection Designed to protect communication equipment, industrial electronic equipment, consumer electronic equipment. Rated breakdown voltage at 100 V/s, V (DC) 230 Tolerance, % ±20 Maximum impulse breakdown voltage at 100 V/µs, V ≤750 Rated impulse discharge current (8/20 µs, 10 cycles), kA 10 Discharge current (50Hz, 1sec, 5 cycles), A 10 Insulation resistance, GΩ ≥10 Capacitance, pF ≤1.5 Dimensions, mm 8x6. | 1.3 | — | — | — | — | DIP | 200pcs | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — |
