Microcircuits are imported
Bipolar transistors
Sensors
Electrolytic capacitors imported
High voltage ceramic capacitors
Imported film capacitors
Capacitors ceramic multilayer output
Trimmer capacitors
Glass fuses
Thermal fuses
0.125 W
0.25 W
1 W
5 - 20 W
1206
2512
Pens
Variables
Thermistors
smd
HC49US
HC
Imported relays
Imported
Switches, buttons
Transformers, inductive components
Panels
LEDs
LED lamps
LED modules
Flashlights
Sound
Radiators
Power supplies
Breadboards
Heat-shrink tubing
Radio Kits
Cables, cords, adapters
Corps
Everything for soldering
Tool
Finished goods
Devices
fasteners
miscellanea
ARDUINO
Bipolar transistors
Sensors
Electrolytic capacitors imported
High voltage ceramic capacitors
Imported film capacitors
Capacitors ceramic multilayer output
Trimmer capacitors
Glass fuses
Thermal fuses
0.125 W
0.25 W
1 W
5 - 20 W
1206
2512
Pens
Variables
Thermistors
smd
HC49US
HC
Imported relays
Imported
Switches, buttons
Transformers, inductive components
Panels
LEDs
LED lamps
LED modules
Flashlights
Sound
Radiators
Power supplies
Breadboards
Heat-shrink tubing
Radio Kits
Cables, cords, adapters
Corps
Everything for soldering
Tool
Finished goods
Devices
fasteners
miscellanea
ARDUINO
Brand «CHINA»
| MPN | Article | Brand | In stock | Price | Discounts | Quantity | Description | Weight g. | Mounting type | Factory packaging | Plug or socket | Number of contacts | Mechanical installation | Type | Board type | Device type |
|---|
| 25558 | CHINA | Unavailable |
41 грн.
|
0 pcs | The five-volt two-channel relay module is designed to control two power loads via Arduino or other controllers. To use the relay module, you need to connect a controlled device to it. Then you need to connect 5V power to the VCC and GND pins of the module. Then it is necessary to connect a microcontroller, computer or other control device to the control terminals IN1 - IN2 of the relay module and start working. The relay module has two interfaces - for connecting the control microcontroller and for connecting controlled devices to the relay. A 4-pin connector is used to connect the relay module to the control device. Contacts GND and VCC for connecting the supply voltage 5V, outputs IN1 - IN2 for connecting the control signal. To connect the load to the relay, there are 6 screw contacts on the board, 3 for each relay. The relay module can be powered both from the control controller and from external power sources. If full galvanic isolation is required, connect VCC to the Arduino's +5V output, but do not connect GND. Remove the VCC - JDVCC jumper. Connect separate +5V to the JDVCC and GND pins on the board to power the transistors and relay coil. Module Specifications: Supply voltage, V 5 Operating current, mA 15 ... 20 Relay SRD-05VDC-SL-C Module dimensions, mm 49x38x20. | 28 | — | — | — | — | — | — | — | Relay/Switching Modules | |||||||||
| 25557 | CHINA | Unavailable |
121 грн.
|
0 pcs | ARDUINO NANO V3.0 CH340G is a miniature Arduino board. Most often, ARDUINO NANO is used to create compact projects due to its overall dimensions. ARDUINO NANO V3.0 CH340G is an analogue of the popular NANO V3.0 FT232RL board. The ARDUINO NANO V3.0 device is designed based on the ATmega328P microcontroller. ATmega328P controller parameters: 32 KB FLASH, 2 KB RAM and 1 KB EEPROM. The ATmega328P microcontroller has 32 pins and is made in a TQFP 32A package. The difference between the ARDUINO NANO V3.0 CH340G board and its analogue is the modified circuit of the USB port converter. In the ARDUINO NANO V3.0 CH340G device, the built-in bootloader and the USB interface to COM port converter are based on the CH340G chip. This chip makes it possible to update the software without the use of programmers. If necessary, the device software can be updated using USB - UART CH340 or any other converter. There are 4 LEDs on the body of the device: POW: informs about the power supply to the board L: Lights up when potential is high on digital pin 13 RX: flashes when there is a high level signal on pin 0 TX: flashes when there is a high level signal on pin 1 The ATmega328P microcontroller allows serial UART communication using the RX and TX digital pins. The controller also supports I2C and SPI serial interfaces. The CH340G chip provides communication between the transceiver and the USB port of the PC. The following pins can be used as PWM pins: 3, 5, 6, 9, 10, and 11. There are 30 pins on the ARDUINO NANO V3.0 CH340G board: 3V3 (17): power supply from CH340G chip +5V (27): input for external stabilized 5V power supply VIN (30): unregulated voltage supply 7 - 12 V GND (4, 29): ground AREF (18): ADC reference voltage RESET (3, 28): reset D0-D13 (1, 2, 5 - 16): digital inputs/outputs A0 - A7 (19 - 26): analogue inputs To write software for ARDUINO NANO, the Arduino IDE development environment is used. The device can be powered by a 5V USB cable or an external 7V to 12V power supply connected to the VIN pin. Pin connectors are included. If you are unable to upload the sketch, go to the Arduino IDE program and select the Arduino Nano board in the Tools tab. After that, in the same tab, you will be able to select "processor: ATmega328P". You need to select not "ATmega328P", but "ATmega328P (Old Bootloader)" and repeat the download. | — | — | — | — | — | — | — | — | Arduino controllers | |||||||||
| 25556 | CHINA | Unavailable |
45 грн.
|
0 pcs | The mini IR motion sensor "HC-SR505" is made in a frameless version and is designed to be embedded in various devices (for example, in a home security system), which is easy to do, given its miniature size. This pyroelectric sensor has a passive principle of operation, it is triggered when a person moves, while the signal at its output is present for about 8 seconds. You can connect the sensor to the Arduino digital input or to the load through a power switch on a field-effect or bipolar transistor. The infrared sensor can be used in lamps for automatically turning on the light, security devices or other automation. The sensor is connected from 3 outputs. The VCC and GND outputs are used to supply voltage, and the S pin is used to transmit digital signals. Supply voltage, V 4.5 ... 20 Maximum current consumption, μA 60 Delay time, s 8 Viewing angle, ° 100 Detection distance, m 3 Operating temperature, °C -20 ... +80 Lens diameter, mm 10 Module dimensions, mm 10 x 23. | 3.2 | — | — | — | — | — | — | — | Arduino sensors | |||||||||
| 25555 | CHINA | Unavailable |
39 грн.
|
0 pcs | The HC-SR501 infrared motion sensor module can detect the movements of a person or animal at a distance of up to 7 meters. This module is often used in simple security systems or household projects (automatically turn on lights when moving, automate electrical appliances, etc.) The module board is designed based on the BISS0001 control chip. The chip receives radiation from the sensor and processes the received information to convert it into an analog or digital signal. The HC-SR501 has two modes of operation (H, L). A jumper is used to change the modes, which is located on the back of the module. In H mode, the module output pulse disappears if there is no movement in the zone for a given time. If you connect the L mode, a logic signal appears at the output when the module is triggered. There are also 2 potentiometers on the board. Using the SX potentiometer, the sensor sensitivity distance is changed (3 - 7 m), respectively, the trimming resistor TX sets the time during which a logical unit will be transmitted when moving in the sensor zone (5 - 300 s). The infrared sensor has 3 pins for connecting to the Arduino microprocessor. The VCC and GND outputs supply voltage to the board, and the OUT pin is required to transmit a signal from the sensor to the device's microcontroller. The voltage supply to the module is carried out from an external power source, an Arduino board or another microcontroller device. Module Specifications: Supply voltage, V 4.5 ... 20 Maximum current consumption, mA 60 Output voltage, V 3.3 Detection distance, m 3 ... 7 Detection angle, ° 145 Delay time, s 5 ... 300 Operating temperature, °C -20 ... +80 Module dimensions, mm 3.2 cm x 2.4 cm x 1.8 Scheme for connecting the module to Arduino Uno: | 7.5 | — | — | — | — | — | — | — | Arduino sensors | |||||||||
| 25554 | CHINA | Unavailable |
17 грн.
|
0 pcs | Wheel wide 66 x 27 mm for models. | 30 | — | — | — | — | — | — | — | Mechanics | |||||||||
| 25553 | CHINA | Unavailable |
7 грн.
|
0 pcs | Wheel model car TT-410 narrow diameter 38 mm. | 2.5 | — | — | — | — | — | — | — | Mechanics | |||||||||
| 25552 | CHINA | Unavailable |
60 грн.
|
0 pcs | Water mini pump - a compact submersible pump for pumping water into various containers. Allows you to pump liquid at a fairly high speed, up to 120 liters per hour. It is used for watering plants, aquariums, fountains, etc. Using this pump in conjunction with various sensors, you can create an automatic watering and plant maintenance system. Can be used in hydroponics and aquaponics. Due to the low voltage of 2.5-6 volts, it can be connected to solar panels. Specifications: Supply voltage: 2.5 - 6 V. Power: 0.4 - 1.5 W. The current depends on the supply voltage. Liquid pumping speed: up to 2 l/min or 120 l/h. Housing material: plastic, sealed. Maximum height of the water column: 0.4-1.1 m. Can pump oil and water. | 26 | — | — | — | — | — | — | — | Motors and servos | |||||||||
| 25551 | CHINA | Unavailable |
155 грн.
|
0 pcs | MG996R servo with metal gear is widely used in car models to control the rotation of the front wheels, in aircraft modeling to rotate the rudder and flaps of the model. In the era of the heyday of technical creativity in the Soviet Union, the name steering machine was assigned to the device of this class. The MG996R servo drive is used to rotate parts of various mechanisms. Thanks to the metal gear reducer, the output shaft develops a force sufficient for use in mobile robots. This servo is an improved version of the MG995 in positioning accuracy and speed. All specifications are the same as the MG995, but the new servo is much more accurate and safer to use on aircraft that require more precise rudder movement. Inside the case is a small control module, which, under the influence of an input signal, supplies power of the appropriate polarity to the electric motor. The input control signal contains the required shaft position. To determine the current position of the shaft, the gearbox is connected to a position sensor. The MG996R electronics calculates the difference between the current gearbox position and the desired one. The control module, focusing on the position sensor, supplies power of the required polarity to the motor to rotate the gearbox, bringing the position transmitted by the control signal and the current one into line. Information about the required position of the shaft is contained in the duty cycle of the control signal pulses. The frequency of the control signal must be constant and equal to 50 Hz. Duty cycle - the ratio of the pulse duration to the period. More often, when analyzing the parameters of the control signal, the duration of the pulse is considered. To form such a signal, it is convenient to use a microcontroller with the function of pulse-width modulation of the output signal. When working on projects based on the Arduino controller, when programming the MK, a special software library of Servo functions is used. Servo connection pinout: Brown power minus Red plus nutrition Orange control Specifications: Gear Material: Metal Servo Type: Digital Supply voltage: 4.8V Rotation angle: 360° ( no limit, rotates all the time) Turn Speed: 0.17sec/60° @ 4.8V Shaft force: 9.4kg/cm @ 4.8V Dimensions: 41 x 20 x 43 mm | 65 | — | — | — | — | — | — | — | Motors and servos | |||||||||
|
Motor with gear for models
#13424
|
25550 | CHINA | Unavailable |
33 грн.
|
0 pcs | Motor with gearbox for models. | 28 | — | — | — | — | — | — | — | Motors and servos | ||||||||
| 25549 | CHINA | Unavailable |
145 грн.
|
0 pcs | Servo MG995-180 is a powerful digital servo with metal gear and torque up to 13 kg/cm. MG995 Specifications: Dimensions: 40.7mm x 19.7mm x 42.9mm Torque: 8.5 kg x cm (at 4.8 V supply), 10 kg x cm (at 6 V) Speed: 0.2s/60º (at 4.8V), 0.16s/60º (at 6V) Supply voltage range: 4.8 - 7.2 V Dead Zone Width: 5 µs Operating temperature range: 0 ºC - 55 ºC Rotation angle: 180°. | 65 | — | — | — | — | — | — | — | Motors and servos | |||||||||
|
Servo MG90S with metal gear
#13422
|
25548 | CHINA | Unavailable |
94 грн.
|
0 pcs | MG90S servo with metal gear is widely used in car models to control the rotation of the front wheels, in aircraft modeling to rotate the rudder and flaps of the model. In the era of the heyday of technical creativity in the Soviet Union, the name steering machine was assigned to the device of this class. The MG90S servo drive is used to rotate parts of various mechanisms. Thanks to the metal gear reducer, the output shaft develops a force sufficient for use in mobile robots. The low speed of rotation of the shaft allows you to more accurately obtain the desired angle of rotation. Inside the case is a small control module, which, under the influence of an input signal, supplies power of the appropriate polarity to the electric motor. The input control signal contains the required shaft position. To determine the current position of the shaft, the gearbox is connected to a position sensor. The MG90S electronics calculate the difference between the current gearbox position and the desired one. The control module, focusing on the position sensor, supplies power of the required polarity to the motor to rotate the gearbox, bringing the position transmitted by the control signal and the current one into line. Information about the required position of the shaft is contained in the duty cycle of the control signal pulses. The frequency of the control signal must be constant and equal to 50 Hz. Duty cycle - the ratio of the pulse duration to the period. More often, when analyzing the parameters of the control signal, the duration of the pulse is considered. To form such a signal, it is convenient to use a microcontroller with the function of pulse-width modulation of the output signal. When working on projects based on the Arduino controller, when programming the MK, a special software library of Servo functions is used. Servo connection pinout: Brown power minus Red plus nutrition Orange control Specifications: Gear Material: Metal Servo Type: Digital Supply voltage: 4.8V Rotation angle: 180° Turn Speed: 0.1sec/60° @ 4.8V Shaft force: 1.8/cm @ 4.8V Dimensions: 22 x 12 x 28 mm | 14 | — | — | — | — | — | — | — | Motors and servos | ||||||||
|
Servo SG92R
#13421
|
25547 | CHINA | Unavailable |
64 грн.
|
0 pcs | SG92R digital servo is a new improved version of SG90. The carbon fiber power take-off and control arms are more durable than the SG90 nylons, and torque is increased. It is a good choice for 3D models and high speed aircraft and helicopter models. Specifications: Size: 23 x 12.2 x 27mm; Torque: 2.5kg/cm (4.8V); Gear Type: Carbon Fiber POM Operating speed: 0.1s /60° (4.8V) Working voltage: 4.8V Temperature range: 0°-55°С Dead zone: 10 µs Wire length: 25 cm. Servo plug: JR (suitable for JR and Futaba) The levers and screws included in the package are included and are compatible with the Futaba servo. Universal "S" type connector fits most receivers including Futaba, JR, Hitec , GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum. | 12 | — | — | — | — | — | — | — | Motors and servos | ||||||||
|
MG996R-180 high torque servo
#13420
|
25546 | CHINA | Unavailable |
136 грн.
|
0 pcs | MG996R servo with metal gear is widely used in car models to control the rotation of the front wheels, in aircraft modeling to rotate the rudder and flaps of the model. In the era of the heyday of technical creativity in the Soviet Union, the name steering machine was assigned to the device of this class. The MG996R servo drive is used to rotate parts of various mechanisms. Thanks to the metal gear reducer, the output shaft develops a force sufficient for use in mobile robots. This servo is an improved version of the MG995 in positioning accuracy and speed. All specifications are the same as the MG995, but the new servo is much more accurate and safer to use on aircraft that require more precise rudder movement. Inside the case is a small control module, which, under the influence of an input signal, supplies power of the appropriate polarity to the electric motor. The input control signal contains the required shaft position. To determine the current position of the shaft, the gearbox is connected to a position sensor. The MG996R electronics calculates the difference between the current gearbox position and the desired one. The control module, focusing on the position sensor, supplies power of the required polarity to the motor to rotate the gearbox, bringing the position transmitted by the control signal and the current one into line. Information about the required position of the shaft is contained in the duty cycle of the control signal pulses. The frequency of the control signal must be constant and equal to 50 Hz. Duty cycle - the ratio of the pulse duration to the period. More often, when analyzing the parameters of the control signal, the duration of the pulse is considered. To form such a signal, it is convenient to use a microcontroller with the function of pulse-width modulation of the output signal. When working on projects based on the Arduino controller, when programming the MK, a special software library of Servo functions is used. Servo connection pinout: Brown power minus Red plus nutrition Orange control Specifications: Gear Material: Metal Servo Type: Digital Supply voltage: 4.8V Rotation angle: 120° Turn Speed: 0.17sec/60° @ 4.8V Shaft force: 9.4kg/cm @ 4.8V Dimensions: 41 x 20 x 43 mm | 66 | — | — | — | — | — | — | — | Motors and servos | ||||||||
| 25545 | CHINA | Unavailable |
56 грн.
|
0 pcs | Servo SG90 is widely used in car models to control the rotation of the front wheels, in aircraft modeling to turn the steering wheel and flaps of the model. In the era of the heyday of technical creativity in the Soviet Union, the name steering machine was assigned to the device of this class. Servo SG90 is used to rotate parts of various mechanisms. Thanks to the gearbox on the output shaft, a force is developed that is sufficient for use in mobile robots. The low speed of rotation of the shaft allows you to more accurately obtain the desired angle of rotation. Inside the case is a small control module, which, under the influence of an input signal, supplies power of the appropriate polarity to the electric motor. The input control signal contains the required shaft position. To determine the current position of the shaft, the gearbox is connected to the variable resistor engine. The Tower Pro SG90 electronics calculates the difference between the current gear position and the desired position. The control module, focusing on the resistance of the variable resistor, supplies power of the required polarity to the motor to turn the gearbox, bringing the position transmitted by the control signal and the current one into line. Information about the required position of the shaft is contained in the duty cycle of the control signal pulses. The frequency of the control signal must be constant and equal to 50 Hz. Duty cycle - the ratio of the pulse duration to the period. More often, when analyzing the parameters of the control signal, the duration of the pulse is considered. To form such a signal, it is convenient to use a microcontroller with the function of pulse-width modulation of the output signal. When working on projects based on the Arduino controller, when programming the MK, a special software library of Servo functions is used. Servo connection pinout: Brown power minus Red plus nutrition Orange control Specifications: Gear Material: Nylon Servo Type: Analog Supply voltage: 4.8V Rotation angle: 180° Turn Speed: 0.1sec/60° @ 4.8V Shaft force: 1.8/cm @ 4.8V Dimensions: 22 x 12 x 31 mm. | 13 | — | — | — | — | — | — | — | Motors and servos | |||||||||
|
Converter USB - UART CH340
#13418
|
25544 | CHINA | Unavailable |
35 грн.
|
0 pcs | Converter USB - UART CH340 is used to connect the microcontroller to a personal computer. The module is connected to the computer using the USB interface, and to the microcontroller device via the UART interface with TTL level signals. Often the module is used to connect Arduino boards or other microprocessor devices to a computer. The converter is designed based on the integrated circuit CH340. The chip provides two-way communication and high speed transfer via USB interface, it also emulates a serial output with a speed from 75 bits to 2 Mbits. The main feature of the microcircuit, which distinguishes it from analogues, is its low price. There are 6 pins on the module board. The VCC and GND pins are used as board power, the TxD pin is the transmit line, and the RxD pin is the receive line of the UART signal. If the microcontroller is already connected to its power supply, then the module is connected to it through 3 outputs: GND, TD and RD. The signal level will change on the TxD and RxD lines, which is set by a jumper between the VCC outputs (3.3V, 5V). Please note that the receiver of the RxD module must be connected to the transmitter of the TX controller, similarly, the TxD output of the converter to the RX of the microcontroller. There are 3 LED indicators on the module, where: one LED informs about the voltage supply to the board, the other two indicators signal the activity of the RxD and TxD outputs. If, when connecting the USB-UART CH340 converter to the PC, the drivers were not installed automatically, then you need to download them from link and then install them manually. The converter supports all versions of the Windows operating system. In addition, on the manufacturer's website you can download drivers for Linux, MAC OS and ANDROID with application examples. | 5.7 | — | 20pcs | — | — | — | — | — | — | ||||||||
| 25537 | CHINA | Unavailable |
60 грн.
|
0 pcs | Double-sided prototyping board 90x150 mm with metallized holes 2 mm. | 40 | DIP | 25pcs | — | — | — | — | Духсторонние | — | |||||||||
| 25539 | CHINA | Unavailable |
56 грн.
|
0 pcs | This module is a USB/RS-485 converter, which is designed to interface devices with a PC (personal computer) via an industrial RS-485 interface. The converter can be used to control motors, build a ventilation /air conditioning system, security systems, control the movement of objects, as well as automate production and production processes. The USB to RS-485 interface converter is designed for a distance of up to 1.2 km. External devices can be connected using a conventional twisted pair cable. The converter board is designed based on CH340 and MAX485 chips, 12MHz crystal and other auxiliary components, which ensure the correct operation of the device. The CH340 chip is used to create a virtual COM port when the converter is connected to a PC, and the MAX485 chip ensures the correct connection of an external device. Thanks to the chip, the converter has a sufficiently high data transfer rate via the USB interface and two-way communication. Transmits data over serial output at up to 6 Mbps. The maximum number of devices that can be connected in parallel without additional amplifiers is 32. The converter is connected to a personal computer using a USB port, and to an external device using a screw terminal block. For further work with the converter it is necessary to install the driver. If, when connected, the PC could not install the driver for the converter, then you need to download it and then install it yourself. The converter is powered from the USB port. The converter supply voltage is 5 V. Converter Specifications: Chip CH340 Supply voltage, V 5 USB 2.0 support Maximum data transfer rate, Mbps 6 Maximum data transmission distance, km 1.2 Module dimensions, mm 60 x 17x 8. | — | — | 20pcs | — | — | — | — | — | — | |||||||||
| 25538 | CHINA | Unavailable |
63 грн.
|
0 pcs | The block for testing servo drives is designed to test the performance of the servo drive and determine its extreme angles. Allows you to estimate the speed of movement and the minimum step. It can be very useful for RC modellers as it allows you to quickly get the drive up and running and test the model before the control electronics are ready. Up to 3 servos can be connected to the servo tester at the same time, such as SG90, SG92R, MG90S, MG995, MG996, EMAX ES08MA, etc. It has three modes of operation: manual, neutral and automatic. In manual mode, the servo position is set by turning the variable resistor knob on the front panel. Neutral mode sets the servo to the middle position. In automatic mode, the servo constantly moves from one extreme position to another. Modes are selected by the "Select" button located in the lower left corner. The current mode is indicated by the corresponding LED above the control knob. Specifications: Output current: ≤ 15mA @5.0V Input voltage: 4.8 - 6 Volts Overall dimensions: 42 x 24 x 23 mm. | 13 | — | 50pcs | — | — | — | — | — | — | |||||||||
| 25536 | CHINA | Unavailable |
3.50 грн.
|
0 pcs | The GL5549 photoresistor is the simplest light sensor. Depending on the intensity of illumination, or rather on the intensity of the light incident on the sensor, the internal resistance of the photoresistor changes. | 0.5 | — | 100 pieces. | — | — | — | — | — | — | |||||||||
| 25535 | CHINA | Unavailable |
3 грн.
|
0 pcs | The GL5537 photoresistor is the simplest light sensor. Depending on the intensity of illumination, or rather on the intensity of the light incident on the sensor, the internal resistance of the photoresistor changes. | 0.5 | — | 100 pieces. | — | — | — | — | — | — | |||||||||
| 25534 | CHINA | Unavailable |
3 грн.
|
0 pcs | The GL5528 photoresistor is the simplest light sensor. Depending on the intensity of illumination, or rather on the intensity of the light incident on the sensor, the internal resistance of the photoresistor changes. | 0.5 | — | 100 pieces. | — | — | — | — | — | — | |||||||||
| 25533 | CHINA | Unavailable |
45 грн.
|
0 pcs | A handy soldering iron stand with a solder spool bracket on a solid metal base. | 150 | — | 1 PC. | — | — | — | — | — | — | |||||||||
| 25532 | CHINA | Unavailable |
3 грн.
|
0 pcs | Case opener 88mm large curved spatula. | 2 | — | 500pcs | — | — | — | — | — | — | |||||||||
| 25531 | CHINA | Unavailable |
28 грн.
|
0 pcs | Direct current pointer voltmeter, size 40x40mm, class 5.0 | 9.2 | — | 100 pieces. | — | — | — | — | — | — | |||||||||
| 25530 | CHINA | Unavailable |
28 грн.
|
0 pcs | AC pointer voltmeter, size 40x40mm, class 5.0 | 9.2 | — | 100 pieces. | — | — | — | — | — | — | |||||||||
| 25529 | CHINA | Unavailable |
3 грн.
|
|
0 pcs | PLS-40, also referred to as "40 pin comb", is a male connector, mainly used as a board to board connector in various electronics. | 2 | DIP | 200pcs | Fork | 40 | For a fee | PLS | — | — | ||||||||
| 25528 | CHINA | Unavailable |
3 грн.
|
|
0 pcs | PLS-40, also referred to as "40 pin comb", is a male connector, mainly used as a board to board connector in various electronics. | 2 | DIP | 200pcs | Fork | 40 | For a fee | PLS | — | — | ||||||||
| 25527 | CHINA | Unavailable |
3 грн.
|
|
0 pcs | PLS-40, also referred to as "40 pin comb", is a male connector, mainly used as a board to board connector in various electronics. | 2 | DIP | 200pcs | Fork | 40 | For a fee | PLS | — | — | ||||||||
| 25526 | CHINA | Unavailable |
3 грн.
|
|
0 pcs | PLS-40, also referred to as "40 pin comb", is a male connector, mainly used as a board to board connector in various electronics. | 2 | DIP | 200pcs | Fork | 40 | For a fee | PLS | — | — | ||||||||
| 25525 | CHINA | Unavailable |
3 грн.
|
|
0 pcs | PLS-40, also referred to as "40 pin comb", is a male connector, mainly used as a board to board connector in various electronics. | 2 | DIP | 200pcs | Fork | 40 | For a fee | PLS | — | — |