Everything for soldering

Results: 58

Filter layout: |
Filters
MPN Article Brand In stock Price Discounts Quantity Description
20885 — 499 шт
25 грн.
Flux gel medium activity based on Amtech rosin RMA-223 . It is used for soldering electronic components, printed circuit boards and fitting SMD components. Washes off with alcohol or PCB cleaner.
22892 — Unavailable
9 грн.
0 pcs Vacation form: skein 1m. Compound: tin 60%, lead 40%. Production: China Quality: excellent, lightweight. Melting temperature: 183-190 degrees Celsius Flux content: 3% Weight: 5.9-6.2 g
22893 — Unavailable
20 грн.
0 pcs Vacation form: skein 1m. Compound: tin 61%, lead 39%. Production: CIS Weight: 24-25
22894 — Unavailable
40 грн.
0 pcs A high quality (1.5mm)mm desoldering braid made from oxygen-free copper coated with a unique, no-clean flux.
22895 — Unavailable
46 грн.
0 pcs A high quality (2mm)mm desoldering braid made from oxygen-free copper coated with a unique, no-clean flux.
22896 — Unavailable
50 грн.
0 pcs A high quality (2.5mm)mm desoldering braid made from oxygen-free copper coated with a unique, no-clean flux.
22897 — Unavailable
40 грн.
0 pcs A high quality (1.5mm)mm desoldering braid made from oxygen-free copper coated with a unique, no-clean flux.
22898 — Unavailable
46 грн.
0 pcs A high quality (2mm)mm desoldering braid made from oxygen-free copper coated with a unique, no-clean flux.
20883 — Unavailable
24 грн.
0 pcs Flux F1 - Acid-free flux based on absolute isopropyl alcohol. The content of water and other impurities in it does not exceed 0.5%. Activating additives work only at soldering temperature and are not active at normal temperature. The residual resistance between the tracks, after soldering, is quite high (about 4.5 MΩ at a step of 0.5 mm). Given the high activity (an order of magnitude more active than alcohol-rosin) and high residual resistance, F1 flux is optimal for soldering printed circuit boards and, remains safe even if not washed off after soldering. When soldering high-voltage, high-resistance, high-frequency circuits, we still recommend that the flux be washed off. Wash off with PCB cleaner. It should be noted that the F1 flux is very convenient when repairing household radio equipment, where oxidized contacts and pads are often found and there is no way to wash off flux residues after soldering.
21056 — Unavailable
45 грн.
0 pcs Heat-resistant kapton tape-adhesive tape (thermoscotch) 10 mm wide High temperature adhesive tape with high insulating properties - Kapton. Designed to isolate electrically conductive surfaces from each other, including at high operating temperatures. Durable polyamide base coated with silicone adhesive resistant to temperature deformation. Easily withstands heating 150-200C without deformation. - Width: 10 mm - Length: 33 m - Maximum temperature: 280C - Optimum temperature: 250C
20884 — Unavailable
26 грн.
0 pcs Flux F3 - further development of flux F1. He more active and allows soldering more oxidized and difficult places . Steel, nickel-plated Chinese connectors, old panels, zinc, silver - you can now solder all this without any problems. The former safety for radioelements inherent in flux F1 has been preserved. However, F3 flux has a lower resistance after drying: about 3 Mohm . It is necessary to wash it off only if this circumstance can affect the operation of the circuit.
20886 — Unavailable
18 грн.
0 pcs Acid-free flux based on absolute isopropyl alcohol. The content of water and other impurities in it does not exceed 0.5%. The average resistance between tracks at 0.5mm pitch is usually close to 10 MΩ. Given the high residual resistance, it can be used when soldering high-voltage, high-resistance, high-frequency circuits. Soldering boards with this flux is quite difficult. Therefore, it is still preferable to use flux F1 (4.5 MΩ), which is an order of magnitude more active, and wash off the flux residues with a PCB cleaner (see below).
20887 — Unavailable
43 грн.
0 pcs FNA, flux for soldering ALUMINUM, aluminum alloys, STAINLESS steels, nickel, copper and other metals that are difficult to solder with USUAL tin-lead solder POS 61, POS 40. Does not require flushing after soldering.
20888 — Unavailable
42 грн.
0 pcs FLUX FOR SOLDERING ALUMINUM, STAINLESS STEEL, nickel, copper and other metals with conventional tin-lead solder POS 61, POS 40.
20889 — Unavailable
33 грн.
0 pcs Flux F1 - Acid-free flux based on absolute isopropyl alcohol. The content of water and other impurities in it does not exceed 0.5%. Activating additives work only at soldering temperature and are not active at normal temperature. The residual resistance between the tracks, after soldering, is quite high (about 4.5 Mohm at a step of 0.5 mm). Given the high activity an order of magnitude more active than alcohol-rosin ) and high residual resistance, - flux F 1 is optimal for soldering printed circuit boards and, remains safe, even if it is not washed off after soldering . When soldering high-voltage, high-resistance, high-frequency circuits, we still recommend that the flux be washed off. Wash off with PCB cleaner. It should be noted that the F1 flux is very convenient when repairing household radio equipment, where oxidized contacts and pads are often found and there is no way to wash off flux residues after soldering.
20891 — Unavailable
28 грн.
0 pcs Flux F3 - further development of flux F1. He more active and allows soldering more oxidized and difficult places . Steel, nickel-plated Chinese connectors, old panels, zinc, silver - you can now solder all this without any problems. The former safety for radioelements inherent in flux F1 has been preserved. However, F3 flux has a lower resistance after drying: about 3 Mohm . It is necessary to wash it off only if this circumstance can affect the operation of the circuit.
20890 — Unavailable
33 грн.
0 pcs Flux F 5 - Water washable flux. It is especially convenient in those cases when you need a beautiful, shiny soldering. Usually used for soldering new boards. Attention! Flux F5 requires obligatory flush!! The base of the flux contains glycerin, and it conducts electricity. Just pour water and scrub the board with a brush on both sides. FLUX F5 MUST BE RINSE !!!
23803 — Unavailable
36 грн.
0 pcs Further development of the F3 flux, in fact it is a concentrate of the F3 flux. Differs in high activity, remaining acid-free. Excellent soldering of oxidized contacts. The resistance after drying is lower than that of the F3 flux, however, it is necessary to wash it off only if this circumstance can affect the operation of the circuit.
30109 — Unavailable
20 грн.
0 pcs Acid-free flux based on absolute isopropyl alcohol. The content of water and other impurities in it does not exceed 0.5%. Average resistance between tracks at 0.5mm pitch, usually close to 10 Mohm . Due to the high residual resistance, it can be used for soldering high-voltage, high-resistance, high frequency circuits . Soldering boards with this flux is quite difficult. Therefore, it is still preferable to use flux F 1(4.5 MOhm), which is an order of magnitude more active, and wash off the remaining flux with a remover for printed circuit boards.
20908 — Unavailable
26 грн.
0 pcs F-61A, flux for soldering ALUMINUM and Amts alloys with copper and steel based on tin-zinc and zinc-cadmium at a temperature of 150-320 degrees. Celsius.
20892 — Unavailable
23 грн.
0 pcs Further development of the F3 flux, in fact it is a concentrate of the F3 flux. Differs in high activity, remaining acid-free. Excellent soldering of oxidized contacts. The resistance after drying is lower than that of the F3 flux, however, it is necessary to wash it off only if this circumstance can affect the operation of the circuit.
20893 — Unavailable
24 грн.
0 pcs LTI-120, a classic high-performance flux for soldering and tinning steel, copper, lead, zinc, nickel, tin, silver, cadmium, palladium, bismuth subject to the complete removal of flux residues. Flux can be removed with a remover for printed circuit boards.
20625 — Unavailable
99 грн.
0 pcs Used to repair damaged tracks on printed circuit boards. Width: 3mm Length: 30 m Thickness: 0.3mm Material: Copper Adhesive layer: Acrylic, One-sided Temperature: C 10 ~ 120 Elongation: 7% ~ 4%
20766 — Unavailable
5 грн.
0 pcs Perfectly removes flux and solder residues, carbon deposits from the tip of the soldering tip. This cleaning method is ideal for durable soldering tips with chrome-plated, as it eliminates the abrasive effect on sting cover. Before work, it is necessary to slightly moisten the sponge with water, squeezing out excess water. Rub the heated sting with the tip on the sponge. material: cellulose size: 50mm x 35mm
23837 — Unavailable
26 грн.
0 pcs F59A, flux for soldering ALUMINUM and Amts alloys with copper and steel with solder based on tin-zinc and zinc-cadmium at a temperature of 150-320 degrees. Celsius.
20909 — Unavailable
27 грн.
0 pcs Rosin-free active flux for low-temperature soldering of aluminum and beryl bronze, structural and corrosion-resistant steels.
20910 — Unavailable
14 грн.
0 pcs SOLDERING ACID, highly active flux based on zinc chloride salts, for soldering steel, cast iron, brass, bronze, copper, nickel, silver (30ml)
21025 — Unavailable
9 грн.
0 pcs Purified pine rosin is a solid flux for soldering radio components. Despite the abundance of modern fluxes, both based on rosin and without her, traditional solid rosin does not lose popularity among beginners radio amateurs and professionals with experience. Does not contain activators in the form of acids. After soldering, rosin residues are easily washed off with flux cleaners, an alcohol-gasoline mixture, or solvents for nitro paints. Packing: cardboard box, 10 grams.
21039 — Unavailable
65 грн.
0 pcs Dosing bottle with needles. Needles can be placed on flux cartridges. Bottle volume - 50 ml. Number of needles - 11 pieces.
21050 — Unavailable
5 грн.
0 pcs Total length: 30mm Needle length: 12.7mm Outer Diameter: 1.84mm Inner diameter: 1.55mm Threaded engagement (half turn) per cartridge. Unlike a conventional medical needle, it is not torn off by the pressure of a thick flux gel. The tube of the needle is metal, the connecting part with the thread is plastic.