Finished goods
| MPN | Article | Brand | In stock | Price | Discounts | Quantity | Description | Weight g. | Mounting type | Factory packaging |
|---|
MPE5-3.3 module
#9864
|
21643 | — | 175 шт |
478 грн.
|
Single channel 5W module. For power supply of radio-electronic equipment, telecommunication equipment, computer equipment, distributed power systems. Technical specifications Output power: 5W Efficiency: 83% Rated input voltage (DC): 48V Input voltage (DC): 36-72V Power corrector: No Galvanic isolation input-output: 500 V Output: 3.3V/1.2A Version: for printed circuit board Operating temperature: -40...+85 C Cooling: convection Protection class (IP): IP 64 Dimensions (LxWxH): 31.6x20.2x11 mm Weight: 0.016 kg Features: Structurally made in a metal case, filled with compound. Output voltage setting accuracy ±2%. Change in output voltage with a change in input ± 0.5%. The change in output voltage when the load changes from 10 to 100% - ±1. Output voltage ripple less than 150 mV. The module has protection against short circuit, overload, external shutdown. | — | — | — | |||
TME1215S DC/DC module
#10771
|
22841 | TRACO POWER | 6 шт |
185 грн.
|
1.3 | DIP | 30pcs | ||||
| 23854 | ADLink | 2 шт |
1,733 грн.
|
1-channel analog input module (mV, V, mA) 1 channel, input ranges: ±150, ±500 mV, ±1, ±5, ±10 V; ±20 mA. Sample rate: 10 S/s. Accuracy ±0.05% or better. 1 digital input, pull-up current 0.5 mA. 2 digital outputs, open-collector 30 V/30 mA max. load. Event counter: Input frequency max. 50 Hz, pulse width min. 0.5m. Power consumption 1.1W typ. (10...30 VDC). Connectors: Screw terminals (pluggable). Version D with 5 one / 2 -digit LED display. | 135 | Clamp | 1 PC. | ||||
Logic T-101U2
#11975
|
24264 | СНГ | 2 шт |
160 грн.
|
Two three - input circuits. | 135 | DIP | 1 PC. | |||
Logic T-402U2
#11979
|
24268 | СНГ | 2 шт |
180 грн.
|
Output power amplifiers for turning on the windings of EMU, MU, intermediate relays, signal lamps. Matching amplifiers to expand the load capacity of logic elements. | 135 | DIP | 1 PC. | |||
TEN 15-4813 DC/DC converter
#11415
|
23532 | TRACO POWER | 1 шт |
960 грн.
|
DC/DC converter: PCB 2"x1"; 15W; Output 15V/1A; Input: 36...75 [48] V; -40...85 °C. | 34 | DIP | 10 pieces. | |||
| 23853 | ADLink | 1 шт |
2,884 грн.
|
Design Body Construction: Plastic Body Mounting type: DIN rail mounting I/O interfaces COM ports RS-485: 1 Maximum speed of RS-485 COM ports: 115200 bps Industrial interfaces/protocols ASCII manufacturer protocol: ADLINK, Slave Analog input Analog input channels: 8 Differential channels: 6 Channels with a common wire: 2 Voltage input range: +/-15mV, +/-50mV, +/-100mV, +/-500mV, +/-1V, +/-2.5V Current input range: 0...20 mA Switching to current measurement mode: Requires the use of an external 125 ohm resistor Connectable thermocouple: N: -270...+1300°C, C: 0...+2320°C, J: 0...+750°C, T: -100...+400°C, K : 0...+1200°C, R: +500...+1750°C, E: 0...+1000°C, S: +500...+1750°C, B: +500. ..+1800°C ADC sampling rate: 10Hz ADC bit depth: 16 Bit Analog input isolation: 2500V Connectors: Screw terminals watchdog timer hardware: yes Software: yes Nutrition Requirements Input supply voltage DC: 10 ... 30 V Power Consumption: 1W Operating conditions Operating temperature: -10 ... 70 °С Humidity: 10 ... 90% | 180 | Clamp | 1 PC. | ||||
| 23855 | ADLink | 1 шт |
3,663 грн.
|
Design Body Construction: Plastic Body Mounting type: DIN rail mounting I/O interfaces COM ports RS-485: 1 Maximum speed of RS-485 COM ports: 115200 bps Industrial interfaces/protocols ASCII manufacturer protocol: ADLINK, Slave analog output Analog output channels: 1 Voltage output range: +/-10V Current output range: 0...20 mA, +/-20 mA DAC bit depth: 12 Bit Output accuracy: 0.2% Analog output isolation: 5000 V Connectors and cables Connectors: Screw terminals Watchdog timer hardware: yes Software: yes Nutrition Requirements Input supply voltage DC: 10 ... 30 V Power Consumption: 1.3W Operating conditions Operating temperature: -10 ... 70 °С Humidity: 10 ... 90% | 135 | Clamp | 1 PC. | ||||
| 23856 | ADLink | 1 шт |
2,138 грн.
|
Design Body Construction: Plastic Body Mounting type: DIN rail mounting I/O interfaces COM ports RS-485: 1 Maximum speed of RS-485 COM ports: 115200 bps Industrial interfaces/protocols ASCII manufacturer protocol: ADLINK, Slave Discrete input Total discrete input channels: 7 Type: Contact with external power supply Logic 1 contact with external power supply: 3.5 ... 30 V Logic 0 contact with external power supply: 0 ... 1 V discrete output Total Discrete Output Channels: 8 Type: Open Collector Output voltage: 0 ... 30 V Maximum output current: 30mA Connectors and cables Connectors: Screw terminals watchdog timer hardware: yes Software: yes Nutrition Requirements Input supply voltage DC: 10 ... 30 V Power Consumption: 0.5W Operating conditions Operating temperature: -10 ... 70 °С Humidity: 10 ... 90% | 150 | Clamp | 1 PC. | ||||
| 23857 | ADLink | 1 шт |
2,003 грн.
|
Design Body Construction: Plastic Body Mounting type: DIN rail mounting I/O interfaces COM ports RS-485: 1 Maximum speed of RS-485 COM ports: 115200 bps Industrial interfaces/protocols ASCII manufacturer protocol: ADLINK, Slave Discrete input Total discrete input channels: 4 Type: Dry contact, Externally powered contact Logic 1 contact with external power supply: 3.5 ... 24 V Logic 0 contact with external power supply: 0 ... 1 V Logic 1 contact dry contact type: Open Dry Contact Logic 0: Closed to GND Discrete input isolation: 5000 V discrete output Total Discrete Output Channels: 4 Type: Electromechanical relay Relay with normally open contacts (A): 2 Maximum switching current for relays with contacts (A): 0.6A at 125V AC, 2A at 30V DC, 0.25A at 250V AC Relay with changeover contacts (C): 2 Maximum switching current for relays with contacts (C): 2A at 30VDC, 0.25A at 250VAC, 0.6A at 125VAC Connectors and cables Connectors: Screw terminals watchdog timer hardware: yes Software: yes Nutrition Requirements Input supply voltage DC: 10 ... 30 V Power Consumption: 0.8W Operating conditions Operating temperature: -10 ... 70 °С Humidity: 10 ... 90% | 180 | Clamp | 1 PC. | ||||
| 23858 | ADLink | 1 шт |
1,980 грн.
|
Repeater RS-485/RS-422 ADLink ND-6510. | 150 | Clamp | 1 PC. | ||||
| 23859 | ADLink | 1 шт |
3,256 грн.
|
ND-6052, 8-channel isolated digital input module. | 150 | Clamp | 1 PC. | ||||
Logic T-106U2
#11976
|
24265 | СНГ | 1 шт |
180 грн.
|
Three independent circuits of diode attachments. | 135 | DIP | 1 PC. | |||
Logic T-202U2
#11978
|
24267 | СНГ | 1 шт |
180 грн.
|
Converting a smoothly varying input voltage to a discrete output signal. | 135 | DIP | 1 PC. | |||
| 25490 | CHINA | — |
355 грн.
|
— | It is mainly used to control the bottom heating of BGA soldering stations, it is used in many fairly expensive soldering stations... Programmable high temperature PID (PID) temperature controller thermostat REX-C100FK02-M. Supports work with ten types of thermocouples and thermal resistances. The PID controller allows you to maintain the set temperature as accurately as possible. The REX-C100 PID thermostat is used to accurately maintain the temperature setpoint over a temperature range in process applications. A wide range of supported sensors allows this regulator to be equally well used in both domestic and industrial processes. The single-channel PID thermostat is made in a compact black plastic case. To display information, two LED four-digit indicators are used, designated PV (current value, red), SV (set value, green). 4 LEDs are also used (ALM1 – alarm output operation indicator; OUT1 – control output operation indicator; АТ – PID automatic control mode indicator). To control the thermostat, 4 buttons are used, which are located on the front panel. The designation of the buttons "SET" (switching settings), "left" (switching the digit), "down" (decrease the value), "up" (increase the value). The device during use can switch between two modes "Operation" and "Setting". In the "Operation" mode, the thermostat takes measurements and regulates the temperature in accordance with the set parameters. In the "Settings" mode, you can set 35 necessary parameters and constants. A description of the setup process is in the instructions attached below. To turn on the "Setting" mode, it is necessary to hold the "SET" button pressed for 3 seconds, the inscription AL1 will appear on the PV indicator. The transition between the parameters is made by the “SET” button, setting the values of the selected parameter with the buttons: “left” (switching the digit), “down” (decreasing the value), “up” (increasing the value). Confirmation of the set value of the parameter is carried out by the “SET” button. To switch to the "Work" mode, you need to press and hold the "SET" button for 3 seconds, or wait 30 seconds and the device will do it automatically. The PID thermostat REX-C100 has a relay output that can switch the power supply circuit of a heating or cooling device. The maximum switching current of the relay is 3A at a voltage of 240V AC. To work with the thermostat, it is necessary to connect a temperature sensor, connect the switched circuit to pins 3, 4, 5 (pins 3-5 are normally closed), then connect the power supply 100 - 240V AC to pins 1 and 2. Pay special attention to the correct connection thermocouple polarity. | 110 | — | 1 PC. | |||
| 22899 | — | — |
34 грн.
|
— | Step-down switching converter (LM2596) The main purpose is the creation of laboratory power supplies with a large voltage regulation range, as well as a switching stabilizer. Description: Input voltage - 3.2-40V Output voltage - 1.25-35V (adjustable) Current - 2A, (Max-3A) Conversion frequency - 150 KHz | — | — | — | |||
| 22945 | — | — |
15 грн.
|
— | Stereo audio amplifier 2x3W D-class based on PAM8403 Output power 2х3W, at supply voltage 5V, load 4Ω PAM8403 2x3W stereo D-class amplifier. Low coefficient of non-linear distortion allows you to get high quality sound with sufficient output power. New, filterless PAM8403 architecture with directly connecting the speakers, thereby greatly simplifying harness and circuit as a whole (and cost). The effectiveness of modern D-class amplifiers are much higher than analog (AB-class) amplifiers with almost the same sound quality, the main application is portable electronics self-powered (acoustic systems in laptops, tablets, monitors, portable TVs...). Specifications: 1. Supply voltage, V 2.5-5.5 2.Efficiency up to 90% 3. Module dimensions, mm 19x21x3 4. Operating temperature range -40°C +85°C | — | — | — | |||
| 20491 | — | — |
50 грн.
|
— | Input voltage: 3 - 32V Output voltage adjustable: 5 - 35V Output current: 3A (MAX). Input current: 4A (MAX). Converter IC: XL6009 analog LM2577 Topology: boost Built-in protection: against short circuit from overheating Board size: 43x21x14mm | — | — | — | |||
Charger TP4056 Mini USB
#8847
|
20512 | CHINA | — |
16 грн.
|
— | The fee contains Li-Ion battery charge controller TP4056. The microcircuit has indication of the charging process and itself turns off the battery when reaching a voltage of 4.2V on it. Red glows when charging The LED will turn green when the battery is fully charged. LED, red will turn off. The process of charging the battery is identical to charging a mobile phone, bright LEDs notify when the battery is charging. The module is suitable for charging Lithium-Ion and Lithium-Polymer (Li-Ion, Li-Po) 3.7V batteries. Whether it's batteries from a mobile phone or 18650 batteries that are used in batteries for laptops. There are two ways to supply voltage to the device: through the connector, mini USB, or by soldering wires, bypassing the mini USB port. | 3 | — | 50pcs | ||
| 20513 | — | — |
76 грн.
|
— | Specifications: Temperature measurement and control range: -50 ~ +110 °C Measurement accuracy: - 0.1 ° C - in the aisles from -9.9 to +99.9 ° C - 1 °C within -50 to -10 and +100 to +110 Control Accuracy: - 0.1 °C - within -9.9 to +99.9 °C - 1 °C within -50 to -10 and +100 to +110 °C Hysteresis: 0.1 to 15 °C Hysteresis accuracy: 0.1 °C Refresh rate: 0.5 seconds. Circuit supply voltage: 12V DC (DC12V). Power consumption: static current: 35mA; current with relay closed: 65mA Thermistor: NTC (10K+-0.5%). The length of the sensor extension is 50 cm. Output: 1 channel relay output, power=10A Humidity 20%-85% Size: 48*40*14mm. product scope: Domestic and industrial heating systems, systems air conditioning, incubators, greenhouses, freezing or cooling installations, drying cabinets, water heating systems, temperature measurement engine with the ability to turn on the radiator fan, the temperature at street, showroom, etc. Description of the device: 3 control buttons: set, +, - . set - selects the installation mode and parameter settings + and - change the value of the setting and parameters In C (cooling) mode, it works as follows: while the temperature is below the setpoint, the relay contacts are open, when the set temperature is reached, the relay contacts close and remain in this position until the temperature drops by the value of the set hysteresis (by default, 2ºС). In H (heating) mode, it works the other way around If you press the "SET" button, then using the "+" and "-" buttons you can set the temperature for switching on the relay (if the current temperature is LOWER than this value, then the contacts of the power terminals are closed.) The thermostat must be paired with a heater or cooler. To set the control temperature, press the SET button, then use the "+" or "-" buttons to set a new temperature, and press the SET button again. To enter the programming mode, hold down the SET button for 5 seconds, then use the "+" or "-" buttons to select a menu item from the list below. To save the settings, press and hold the SET button, or do not press any buttons for 10 seconds. To return to the default settings, press and hold the "+" button. | — | — | — | |||
| 20514 | — | — |
105 грн.
|
— | Specifications: Input voltage 10...32 V Output voltage 12...35 V Output current max. 6 A Input current max (with additional cooling) 10 A Efficiency (input -16V, output -19V, 2.5A) 94% Size 65x46x23mm Built-in indicator | — | — | — | |||
| 20540 | — | — |
36 грн.
|
— | Specifications: Input voltage: 4.5-28V Output adjustable voltage: 0.8-20V Output current: up to 3A Working frequency: 1MHz Efficiency: 96% Working temperature: -40 C - +85 C Size: 22 x 17 x 4 mm | — | — | — | |||
| 20595 | — | — |
18 грн.
|
— | Input voltage: 4.75-23V Output voltage: 1.0V-17V Output current: short-term no more than 3A, long-term no more than 1.8A Conversion efficiency: 96% (maximum) Switching frequency: 340KHz Output ripple: 30 mV (no load) Load regulation: ± 0.5% Voltage Regulation: ±2.5% Operating Temperature: -40℃ to +85℃ External dimensions: 17 * 11 * 3.8 (L * W * H) (mm) Features: very small size, and a wide range of applications, due to compactness. | — | — | — | |||
MT3608 Boost DC-DC 2A
#9224
|
20626 | — | — |
25 грн.
|
— | Maximum output current: 2A Input voltage: 2V ~ 24V Maximum output voltage: 28V Efficiency: up to 93% Dimensions: 36mm*17mm*14mm | — | — | — | ||
Charger TP4056 Micro USB
#9686
|
20927 | CHINA | — |
14 грн.
|
— | The fee contains Li-Ion battery charge controller TP4056. The microcircuit has indication of the charging process and itself turns off the battery when reaching a voltage of 4.2V on it. Red glows when charging The LED will turn green when the battery is fully charged. LED, red will turn off. The process of charging the battery is identical to charging a mobile phone, bright LEDs notify when the battery is charging. The module is suitable for charging Lithium-Ion and Lithium-Polymer (Li-Ion, Li-Po) 3.7V batteries. Whether it's batteries from a mobile phone or 18650 batteries that are used in batteries for laptops. There are two ways to supply voltage to the device: through the connector, micro USB, or by soldering wires, bypassing the Micro USB connector. Specifications: Input voltage: 4.5V-5.5V Full charge voltage: 4.2V Charge current: 1A Input connector: Micro USB (+ places for soldering wires) Operating temperature: -10..+85 Module dimensions: 5 x 19 x 25 mm | 3 | — | 50pcs | ||
| 20930 | CHINA | — |
18 грн.
|
— | The module allows you to charge Li-Ion batteries (both protected and unprotected) from the USB port via a microUSB cable. Charging was assembled on the basis of a specialized charge controller TP4056. MicroUSB power is duplicated by contacts on the board. Working principle: When power is connected without a battery, the red LED lights up, and the blue blinks periodically. When a discharged battery is connected, the red LED goes out and the blue one lights up - the charging process begins. As long as the voltage on the battery is less than 2.9V, the charge current is limited to 90-100mA. With an increase in voltage above 2.9V, the charge current increases sharply to 800mA with a further gradual increase to a nominal value of 1000mA. When the voltage reaches 4.1V, the charge current begins to gradually decrease, then the voltage stabilizes at the level of 4.2V, and after the charging current decreases to 105mA, the LEDs begin to switch periodically, indicating the end of the charge, while the charge still continues with switching to the blue LED . Switching occurs in accordance with the battery voltage control hysteresis. The rated charge current is set by a 1.2kΩ resistor. If necessary, the current can be reduced by increasing the resistor value according to the controller specification. Red LED - indication of the battery charging process. Blue LED - indication of the end of the battery charge. Overcurrent protection is two-stage and is triggered if: - load current exceeds 27A for 3µs - load current exceeds 3A for 10ms Input voltage 5V Maximum charging current 1A Charge Cutoff Voltage 4.2V +/-1% Battery overdischarge protection 2.4 V 3A overcurrent battery protection MicroUSB input interface Size 27x17mm | 3 | — | 50pcs | |||
| 21732 | — | — |
55 грн.
|
— | A high-quality stereo audio amplifier module based on the PAM8610 chip with an output power of up to 10W at 10% distortion with a load resistance of 8 ohms and a supply voltage of 13V. The maximum output power can be up to 15W at a load of 4 ohms. Additionally, the Shutdown input is output to turn off the amplifier. A low level on this input puts the amplifier into low power mode when there is no input signal. For a more economical shutdown, a complete shutdown of the amplifier supply voltage should be provided. Supply voltage: 7 to 15 V Maximum current consumption: 2A Amplifier class: D Amplifier efficiency: up to 90%; Frequency response: 20Hz - 20kHz; Input impedance: 15 kOhm; Signal to noise ratio (SNR): 86%; Harmonic distortion: Board dimensions: 30mm x 25mm x 2.5mm | — | — | — | |||
| 21741 | — | — |
26 грн.
|
— | The board has a micro USB port. Size: 36 x 17 x 14mm Input voltage: 2-24V Maximum output voltage: 28V Current: maximum - 2 A | — | — | — | |||
| 21852 | — | — |
120 грн.
|
— | Specifications: Charger Dual USB x 5V 1A LCD Micro USB input: 5V 1A USB output: 5V 2.1A /5V 1A (Dual USB interface) Charging with display: intelligent digital display Battery type : liquid lithium-ion batteries (18650) Product size: 57mm x 28mm Screen Size: 27mm x 17mm | — | — | — | |||
| 23148 | — | — |
28 грн.
|
— | Voltage regulator step-down 3...37V to 1.25...35V. | — | — | — |
