Devices, products, materials
Filter layout:
|
- Sound
- Radiators
- Electric motors
- Power supplies
- Breadboards
- Heat-shrink tubing
- cores, magnets
- Radio Kits
- Cables, cords, adapters
- Corps
- Everything for soldering
- Tool
- Finished goods
- Devices
- fasteners
- miscellanea
| MPN | Article | Brand | In stock | Price | Discounts | Quantity | Description | Weight g. | Factory packaging |
|---|
| 20904 | — | — |
24 грн.
|
— | PMS-100 silicone oil is intended for lubrication of lightly loaded parts in friction and rolling units in appliances, household and office equipment. Used for lubricating rubber seals, processing high-voltage wires and parts. Operating temperature: -50° to +200° С | — | — | |||
| 20905 | — | — |
25 грн.
|
— | Silicone oil silicone PMS-200 is intended for lubrication lightly loaded parts in friction and rolling units in appliances, household and office equipment. For lubricating rubber seals, processing high voltage wires and parts. Viscosity (in centistokes): 200cSt. Volume: 10ml. Operating temperature: -50° to +200° С | — | — | |||
| 20906 | — | — |
25 грн.
|
— | Specifications: - Viscosity (in centistokes): 1000; - Working temperature range: from - 50℃ to +200℃; | — | — | |||
| 20907 | — | — |
34 грн.
|
— | — | — | — | |||
| 23837 | — | — |
26 грн.
|
— | F59A, flux for soldering ALUMINUM and Amts alloys with copper and steel with solder based on tin-zinc and zinc-cadmium at a temperature of 150-320 degrees. Celsius. | — | — | |||
| 20909 | — | — |
27 грн.
|
— | Rosin-free active flux for low-temperature soldering of aluminum and beryl bronze, structural and corrosion-resistant steels. | — | — | |||
SOLDERING ACID, (30ml)
#9680
|
20910 | — | — |
14 грн.
|
— | SOLDERING ACID, highly active flux based on zinc chloride salts, for soldering steel, cast iron, brass, bronze, copper, nickel, silver (30ml) | — | — | ||
Charger TP4056 Micro USB
#9686
|
20927 | CHINA | — |
14 грн.
|
— | The fee contains Li-Ion battery charge controller TP4056. The microcircuit has indication of the charging process and itself turns off the battery when reaching a voltage of 4.2V on it. Red glows when charging The LED will turn green when the battery is fully charged. LED, red will turn off. The process of charging the battery is identical to charging a mobile phone, bright LEDs notify when the battery is charging. The module is suitable for charging Lithium-Ion and Lithium-Polymer (Li-Ion, Li-Po) 3.7V batteries. Whether it's batteries from a mobile phone or 18650 batteries that are used in batteries for laptops. There are two ways to supply voltage to the device: through the connector, micro USB, or by soldering wires, bypassing the Micro USB connector. Specifications: Input voltage: 4.5V-5.5V Full charge voltage: 4.2V Charge current: 1A Input connector: Micro USB (+ places for soldering wires) Operating temperature: -10..+85 Module dimensions: 5 x 19 x 25 mm | 3 | 50pcs | ||
| 20930 | CHINA | — |
18 грн.
|
— | The module allows you to charge Li-Ion batteries (both protected and unprotected) from the USB port via a microUSB cable. Charging was assembled on the basis of a specialized charge controller TP4056. MicroUSB power is duplicated by contacts on the board. Working principle: When power is connected without a battery, the red LED lights up, and the blue blinks periodically. When a discharged battery is connected, the red LED goes out and the blue one lights up - the charging process begins. As long as the voltage on the battery is less than 2.9V, the charge current is limited to 90-100mA. With an increase in voltage above 2.9V, the charge current increases sharply to 800mA with a further gradual increase to a nominal value of 1000mA. When the voltage reaches 4.1V, the charge current begins to gradually decrease, then the voltage stabilizes at the level of 4.2V, and after the charging current decreases to 105mA, the LEDs begin to switch periodically, indicating the end of the charge, while the charge still continues with switching to the blue LED . Switching occurs in accordance with the battery voltage control hysteresis. The rated charge current is set by a 1.2kΩ resistor. If necessary, the current can be reduced by increasing the resistor value according to the controller specification. Red LED - indication of the battery charging process. Blue LED - indication of the end of the battery charge. Overcurrent protection is two-stage and is triggered if: - load current exceeds 27A for 3µs - load current exceeds 3A for 10ms Input voltage 5V Maximum charging current 1A Charge Cutoff Voltage 4.2V +/-1% Battery overdischarge protection 2.4 V 3A overcurrent battery protection MicroUSB input interface Size 27x17mm | 3 | 50pcs | |||
| 21025 | — | — |
9 грн.
|
— | Purified pine rosin is a solid flux for soldering radio components. Despite the abundance of modern fluxes, both based on rosin and without her, traditional solid rosin does not lose popularity among beginners radio amateurs and professionals with experience. Does not contain activators in the form of acids. After soldering, rosin residues are easily washed off with flux cleaners, an alcohol-gasoline mixture, or solvents for nitro paints. Packing: cardboard box, 10 grams. | — | — | |||
| 21039 | — | — |
65 грн.
|
— | Dosing bottle with needles. Needles can be placed on flux cartridges. Bottle volume - 50 ml. Number of needles - 11 pieces. | — | — | |||
| 21048 | — | — |
51 грн.
|
— | Material - brass For drill size - from 0.8 to 1.5 mm Shaft bore diameter - 2.0 mm Diameter - 8 mm Length - 25.4 mm | — | — | |||
| 21049 | — | — |
85 грн.
|
— | Material - brass For drill size - from 0.5 to 3.0 mm Shaft bore diameter - 2.35 mm Diameter - 9.3 mm Length - 27.5 mm | — | — | |||
| 21050 | — | — |
5 грн.
|
— | Total length: 30mm Needle length: 12.7mm Outer Diameter: 1.84mm Inner diameter: 1.55mm Threaded engagement (half turn) per cartridge. Unlike a conventional medical needle, it is not torn off by the pressure of a thick flux gel. The tube of the needle is metal, the connecting part with the thread is plastic. | — | — | |||
| 21051 | — | — |
5 грн.
|
— | Total length: 30mm Needle length: 12.7mm Outer Diameter: 1.81mm Inner diameter: 1.37mm Threaded engagement (half turn) per cartridge. Unlike a conventional medical needle, it is not torn off by the pressure of a thick flux gel. The tube of the needle is metal, the connecting part with the thread is plastic. | — | — | |||
| 21052 | — | — |
5 грн.
|
— | Total length: 30mm Needle length: 12.7mm Outer Diameter: 1.60mm Inner diameter: 1.32mm Threaded engagement (half turn) per cartridge. Unlike a conventional medical needle, it is not torn off by the pressure of a thick flux gel. The tube of the needle is metal, the connecting part with the thread is plastic. | — | — | |||
| 21053 | — | — |
5 грн.
|
— | Total length: 30mm Needle length: 12.7mm Outer Diameter: 1.26mm Inner diameter: 0.84mm Threaded engagement (half turn) per cartridge. Unlike a conventional medical needle, it is not torn off by the pressure of a thick flux gel. The tube of the needle is metal, the connecting part with the thread is plastic. | — | — | |||
| 21054 | — | — |
22 грн.
|
— | Heat-resistant kapton tape-adhesive tape (thermoscotch) 3 mm wide High temperature adhesive tape with high insulating properties - Kapton. Designed to isolate electrically conductive surfaces from each other, including at high operating temperatures. Durable polyamide base coated with silicone adhesive resistant to temperature deformation. Easily withstands heating 150-200C without deformation. - Width: 3 mm - Length: 33 m - Maximum temperature: 280C - Optimum temperature: 250C | — | — | |||
| 21055 | — | — |
42 грн.
|
— | Heat-resistant kapton tape-adhesive tape (thermoscotch) 8 mm wide High temperature adhesive tape with high insulating properties - Kapton. Designed to isolate electrically conductive surfaces from each other, including at high operating temperatures. Durable polyamide base coated with silicone adhesive resistant to temperature deformation. Easily withstands heating 150-200C without deformation. - Width: 8 mm - Length: 33 m - Maximum temperature: 280C - Optimum temperature: 250C | — | — | |||
| 21057 | — | — |
65 грн.
|
— | Heat-resistant kapton tape-adhesive tape (thermoscotch) 12 mm wide High temperature adhesive tape with high insulating properties - Kapton. Designed to isolate electrically conductive surfaces from each other, including at high operating temperatures. Durable polyamide base coated with silicone adhesive resistant to temperature deformation. Easily withstands heating 150-200C without deformation. - Width: 12 mm - Length: 33 m - Maximum temperature: 280C - Optimum temperature: 250C | — | — | |||
| 21058 | — | — |
70 грн.
|
— | Heat-resistant kapton tape-adhesive tape (thermoscotch) 15 mm wide High temperature adhesive tape with high insulating properties - Kapton. Designed to isolate electrically conductive surfaces from each other, including at high operating temperatures. Durable polyamide base coated with silicone adhesive resistant to temperature deformation. Easily withstands heating 150-200C without deformation. - Width: 15 mm - Length: 33 m - Maximum temperature: 280C - Optimum temperature: 250C | — | — | |||
| 21059 | — | — |
95 грн.
|
— | Heat-resistant kapton tape-adhesive tape (thermoscotch) 20 mm wide High temperature adhesive tape with high insulating properties - Kapton. Designed to isolate electrically conductive surfaces from each other, including at high operating temperatures. Durable polyamide base coated with silicone adhesive resistant to temperature deformation. Easily withstands heating 150-200C without deformation. - Width: 20 mm - Length: 33 m - Maximum temperature: 280C - Optimum temperature: 250C | — | — | |||
| 21060 | — | — |
140 грн.
|
— | Heat-resistant kapton tape-adhesive tape (thermoscotch) 30 mm wide High temperature adhesive tape with high insulating properties - Kapton. Designed to isolate electrically conductive surfaces from each other, including at high operating temperatures. Durable polyamide base coated with silicone adhesive resistant to temperature deformation. Easily withstands heating 150-200C without deformation. - Width: 25 mm - Length: 33 m - Maximum temperature: 280C - Optimum temperature: 250C | — | — | |||
| 21731 | — | — |
75 грн.
|
— | AT89C2051-based of four electronic clock kit Kit Model: YSZ-4 Supply voltage: 3V-6V PCB Size: 52mm * wide 42mm | — | — | |||
| 21732 | — | — |
55 грн.
|
— | A high-quality stereo audio amplifier module based on the PAM8610 chip with an output power of up to 10W at 10% distortion with a load resistance of 8 ohms and a supply voltage of 13V. The maximum output power can be up to 15W at a load of 4 ohms. Additionally, the Shutdown input is output to turn off the amplifier. A low level on this input puts the amplifier into low power mode when there is no input signal. For a more economical shutdown, a complete shutdown of the amplifier supply voltage should be provided. Supply voltage: 7 to 15 V Maximum current consumption: 2A Amplifier class: D Amplifier efficiency: up to 90%; Frequency response: 20Hz - 20kHz; Input impedance: 15 kOhm; Signal to noise ratio (SNR): 86%; Harmonic distortion: Board dimensions: 30mm x 25mm x 2.5mm | — | — | |||
| 21733 | — | — |
55 грн.
|
— | Amplifier DIY Kit Chip: TDA7297 Power: 6...18V Power: 2*15W | — | — | |||
| 21741 | — | — |
26 грн.
|
— | The board has a micro USB port. Size: 36 x 17 x 14mm Input voltage: 2-24V Maximum output voltage: 28V Current: maximum - 2 A | — | — | |||
| 21852 | — | — |
120 грн.
|
— | Specifications: Charger Dual USB x 5V 1A LCD Micro USB input: 5V 1A USB output: 5V 2.1A /5V 1A (Dual USB interface) Charging with display: intelligent digital display Battery type : liquid lithium-ion batteries (18650) Product size: 57mm x 28mm Screen Size: 27mm x 17mm | — | — | |||
| 22664 | CHINA | — |
60 грн.
|
— | USB - micro USB cable for charger of smartphones and tablets. | 25 | 10 pieces. | |||
| 22665 | CHINA | — |
85 грн.
|
— | USB - micro USB cable for charger of smartphones and tablets. | 34 | 10 pieces. |
![SILICONE GREASE PMS-200, for "COOLER"s (10ml, with spout)](/wa-data/public/shop/products/74/96/9674/images/9641/9641.48x48.jpg "SILICONE GREASE PMS-200, for "COOLER"s (10ml, with spout)")
![SILICONE GREASE PMS-12500, "microlift", damping (10ml, with spout)](/wa-data/public/shop/products/77/96/9677/images/9644/9644.48x48.jpg "SILICONE GREASE PMS-12500, "microlift", damping (10ml, with spout)")
![FLUX "FIM" (30 ml), rosin-free active flux for soldering structural and corrosion-resistant steels.](/wa-data/public/shop/products/79/96/9679/images/12727/12727.48x48.jpg "FLUX "FIM" (30 ml), rosin-free active flux for soldering structural and corrosion-resistant steels.")
