Diodes domestic
Diode bridges domestic
Triacs
Domestic thyristors
Domestic zener diodes
Microcircuits are imported
Domestic microcircuits
Domestic transistors
Domestic optocouplers
Sensors
Varicaps
radio tubes
Domestic electrolytic capacitors
High voltage ceramic capacitors
Ceramic Capacitors
Domestic film capacitors
Metal-paper capacitors
Trimmer capacitors
Glass fuses
Ceramic fuses
Fuse holders
0.125 W
0.25 W
0.4-0.6 W
1 W
2 W
5 - 20 W
25-150W
Pens
joint venture
Variables
Thermistors
Resistor assemblies
HC49
HC6U
UB-UE
K1-4
Filters
Contactors
Domestic relays
Domestic
Switches, buttons
Transformers, chokes
Shunts
Varistors
Dischargers
LEDs
LED and LCD indicators
Fixtures
Sound
Electric motors
cores, magnets
Radio Kits
Corps
Finished goods
Devices
fasteners
miscellanea
Diode bridges domestic
Triacs
Domestic thyristors
Domestic zener diodes
Microcircuits are imported
Domestic microcircuits
Domestic transistors
Domestic optocouplers
Sensors
Varicaps
radio tubes
Domestic electrolytic capacitors
High voltage ceramic capacitors
Ceramic Capacitors
Domestic film capacitors
Metal-paper capacitors
Trimmer capacitors
Glass fuses
Ceramic fuses
Fuse holders
0.125 W
0.25 W
0.4-0.6 W
1 W
2 W
5 - 20 W
25-150W
Pens
joint venture
Variables
Thermistors
Resistor assemblies
HC49
HC6U
UB-UE
K1-4
Filters
Contactors
Domestic relays
Domestic
Switches, buttons
Transformers, chokes
Shunts
Varistors
Dischargers
LEDs
LED and LCD indicators
Fixtures
Sound
Electric motors
cores, magnets
Radio Kits
Corps
Finished goods
Devices
fasteners
miscellanea
Brand «СНГ»
| MPN | Article | Brand | In stock | Price | Discounts | Quantity | Description | Weight g. | Pin type | Type of shell | Working voltage, V | Case diameter D, mm | Body length L, mm | Transistor case type | Transistor type | Mounting type | Urev. max, V | Ipr. max. | Appointment | Diode type | Structure | Power | Factory packaging | Collector-emitter voltage | Collector current | Frequency | Current gain | Capacity | Resistance | Resistor power | Accuracy | Resistor housing type | Stabilization voltage | Working current, A | Material | Plug or socket | Number of contacts | Mechanical installation | Type | Diode design | Height (length), mm | Permeability | Core type | Material | Width, mm | Thickness, mm |
|---|
Chip KR571HL5A
#14302
|
26502 | СНГ | — |
8 грн.
|
|
— | Six non-inverting trunk amplifiers with tri-state input and output. | 1.2 | — | DIP16 | — | — | — | — | — | DIP | — | — | Interfaces | — | — | — | 90pcs | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||
| 26499 | СНГ | — |
6 грн.
|
— | K71-7 single-layer polystyrene metallized capacitors. Are issued in rectangular cases with wire conclusions. Designed for operation in circuits of direct, alternating, pulsating currents and in pulsed modes. | 1.8 | Flexible Leads | — | 250 | — | — | — | — | DIP | — | — | — | — | — | — | 200pcs | — | — | — | — | 1.375nF (1375pF) | — | — | 1 % | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||||
| 26497 | СНГ | — |
6 грн.
|
— | K71-7 single-layer polystyrene metallized capacitors. Are issued in rectangular cases with wire conclusions. Designed for operation in circuits of direct, alternating, pulsating currents and in pulsed modes. | 1.8 | Flexible Leads | — | 250 | — | — | — | — | DIP | — | — | — | — | — | — | 200pcs | — | — | — | — | 6.8nF (6800pF) | — | — | 1 % | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||||
| 26496 | СНГ | — |
8 грн.
|
— | K71-7 single-layer polystyrene metallized capacitors. Are issued in rectangular cases with wire conclusions. Designed for operation in circuits of direct, alternating, pulsating currents and in pulsed modes. | 1.8 | Flexible Leads | — | 250 | — | — | — | — | DIP | — | — | — | — | — | — | 200pcs | — | — | — | — | 5nF (5000pF) | — | — | 0,5 % | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||||
| 26494 | СНГ | — |
6 грн.
|
— | K71-7 single-layer polystyrene metallized capacitors. Are issued in rectangular cases with wire conclusions. Designed for operation in circuits of direct, alternating, pulsating currents and in pulsed modes. | 1.8 | Flexible Leads | — | 250 | — | — | — | — | DIP | — | — | — | — | — | — | 200pcs | — | — | — | — | 3nF (3000pF) | — | — | 1 % | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||||
| 26493 | СНГ | — |
6 грн.
|
— | K71-7 single-layer polystyrene metallized capacitors. Are issued in rectangular cases with wire conclusions. Designed for operation in circuits of direct, alternating, pulsating currents and in pulsed modes. | 1.8 | Flexible Leads | — | 250 | — | — | — | — | DIP | — | — | — | — | — | — | 200pcs | — | — | — | — | 3.2nF (3200pF) | — | — | 1 % | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||||
| 26490 | СНГ | — |
6 грн.
|
— | K71-7 single-layer polystyrene metallized capacitors. Are issued in rectangular cases with wire conclusions. Designed for operation in circuits of direct, alternating, pulsating currents and in pulsed modes. | 1.8 | Flexible Leads | — | 250 | — | — | — | — | DIP | — | — | — | — | — | — | 60pcs | — | — | — | — | 3nF (3000pF) | — | — | 1 % | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||||
Fuse PK45, 5A, 600V
#14290
|
26489 | СНГ | — |
3 грн.
|
|
— | Fuses (fusible inserts) are designed to break the electrical circuit if the current in the circuit exceeds the specified one. | 1 | — | — | 600 | 7 | 45 | — | — | DIP | — | — | — | — | — | — | 200pcs | — | — | — | — | — | — | — | — | — | — | 5 | Glass | — | — | — | — | — | — | — | — | — | — | — | |||||||||||
Fuse PK45, 4A, 600V
#14289
|
26488 | СНГ | — |
3 грн.
|
|
— | Fuses (fusible inserts) are designed to break the electrical circuit if the current in the circuit exceeds the specified one. | 1 | — | — | 600 | 7 | 45 | — | — | DIP | — | — | — | — | — | — | 200pcs | — | — | — | — | — | — | — | — | — | — | 4 | Glass | — | — | — | — | — | — | — | — | — | — | — | |||||||||||
| 26483 | СНГ | — |
25 грн.
|
|
— | M400NN-19, 100x20x4, Ferrite bar (plate). | 37 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 100 pieces. | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 100 | М400НН | Plate | Ferrite | 20 | 4 | ||||||||||||
| 26476 | СНГ | — |
22 грн.
|
|
— | Plug VSh-P-2-O-IP43-10 A-42V electric with normal protection, without shutters, TU 3464-001-80578285-2007. | 32 | — | — | — | — | — | — | — | Screw | — | — | — | — | — | — | 100 pieces. | — | — | — | — | — | — | — | — | — | — | — | — | Fork | 2 | per wire | VS | — | — | — | — | — | — | — | ||||||||||||
| 26472 | СНГ | — |
50 грн.
|
— | Capacitors MBGP metal-paper sealed high-voltage impulse. Designed for operation in DC and pulsating current circuits, generation of powerful discharge current pulses in the load. | 210 | hard conclusions | — | 200 | — | — | — | — | DIP | — | — | — | — | — | — | 6pcs | — | — | — | — | 24µF | — | — | 10 % | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||||
| 26467 | СНГ | — |
3 грн.
|
— | Flange for fastening a powerful transistor to a radiator. The flange is suitable for mounting the following transistors: P213-217 P605, P701 And some other semiconductor products. | 1 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 100 pieces. | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||||
Transistor P215
#14266
|
26465 | СНГ | — |
15 грн.
|
|
— | Transistors P215 germanium alloy structures pnp universal. Designed for use in switching devices, output stages of low-frequency amplifiers, DC voltage converters. The main technical characteristics of the P215 transistor: • Transistor structure: pnp • Рк t max - Constant power dissipation of the collector with a heat sink: 10 W; • fh21e - Limiting frequency of the current transfer coefficient of the transistor for circuits with a common emitter: not less than 0.15 MHz; • Ukbo samples - Breakdown voltage collector-base at a given reverse collector current and open emitter circuit: 80 V; • Uebo samples - Emitter-base breakdown voltage at a given emitter reverse current and collector open circuit: 15 V; • Ik max - Maximum allowable DC collector current: 5 A; • Ikbo - Collector reverse current - current through the collector junction at a given collector-base reverse voltage and an open emitter terminal: no more than 0.3 mA; • h21E - Static current transfer coefficient for a circuit with a common emitter in a large signal mode: 20... 150; • Rke us - Saturation resistance between collector and emitter: no more than 0.3 Ohm. | 9.2 | — | — | — | — | — | — | Bipolar | DIP | — | — | — | — | PNP | 10Вт | 40pcs | 70В | 5А | 0,15МГц | 150 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||
Power diode V25-9
#14264
|
26463 | СНГ | — |
75 грн.
|
|
— | B25-9 Diffusion silicon diode. It is intended for operation in circuits of static converters of electric power of direct and alternating currents at frequencies up to 2 kHz. Are issued in the glass-to-metal case with a flexible conclusion. Average direct current - 25A Repetitive impulse reverse voltage - 900 V Cooling air natural or forced. | 90 | — | — | — | — | — | — | — | Screw | 900V | 25A | — | Rectifier | — | — | 1 PC. | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | single | — | — | — | — | — | — | |||||||||||
Transistor KT603G
#14261
|
26460 | СНГ | — |
14 грн.
|
|
— | The main technical characteristics of the transistor KT603G: • Transistor structure: npn; • Рк max - Constant power dissipation of the collector: 0.5 W; • fgr - Limiting frequency of the current transfer coefficient of the transistor for a circuit with a common emitter: not less than 200 MHz; • Uкer max - Maximum collector-emitter voltage at a given collector current and a given resistance in the base-emitter circuit: 15 V (1kΩ); • Uebo max - Maximum emitter-base voltage at a given emitter reverse current and collector open circuit: 3 V; • Ik max - Maximum allowable DC collector current: 300 mA; • Ik and max - The maximum allowable collector pulse current: 600 mA; • Ikbo - Collector reverse current - current through the collector junction at a given collector-base reverse voltage and an open emitter output: no more than 5 μA; • h21e - Static current transfer coefficient of the transistor for circuits with a common emitter: more than 60; • Sk - Collector junction capacitance: no more than 15 pF; • Rke us - Saturation resistance between collector and emitter: no more than 7 ohms. | 1.5 | — | — | — | — | — | КТЮ-3-3 | Bipolar | DIP | — | — | — | — | NPN | 500мВт | 100 pieces. | 15В | 300мА | 200МГц | 60 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||
Transistor KT349B
#14260
|
26459 | СНГ | — |
6 грн.
|
|
— | The main technical characteristics of the transistor KT349B: • Transistor structure: pnp; • Рк max - Constant power dissipation of the collector: 200 mW; • fgr - Limiting frequency of the current transfer coefficient of the transistor for a circuit with a common emitter: not less than 300 MHz; • Uкer max - Maximum collector-emitter voltage at a given collector current and a given (final) resistance in the base-emitter circuit: 15 V (10 kOhm); • Uebo max - Maximum emitter-base voltage at a given emitter reverse current and collector open circuit: 4 V; • Ik max - The maximum allowable DC collector current: 10 mA; • Ikbo - Collector reverse current - current through the collector junction at a given collector-base reverse voltage and an open emitter output: no more than 1 μA; • h21E - Static current transfer coefficient for a circuit with a common emitter in a large signal mode: 40... 160; • Sk - Collector junction capacitance: no more than 6 pF; • Rke us - Saturation resistance between collector and emitter: no more than 30 ohms. | 0.5 | — | — | — | — | — | КТ-1-7 | Bipolar | DIP | — | — | — | — | PNP | 200мВт | 100 pieces. | 15В | 40мА | 300МГц | 160 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||
Stabistor D220S
#14257
|
26456 | СНГ | — |
4 грн.
|
|
— | Stabistors D220S silicon, microalloy, low power. Are intended for stabilization of direct and impulse voltage and limitation of voltage impulses. The main technical parameters of the D220S stabistor: • Rated stabilization voltage at Ist 1 mA: 0.59 V; • Minimum allowable stabilization current: 1 mA; • Maximum allowable stabilization current: 50 mA; • Working range of ambient temperature: -60... +120 °С. | 0.4 | — | — | — | — | — | — | — | DIP | — | — | — | — | — | — | 100 pieces. | — | — | — | — | — | — | — | — | — | 0.59V | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||
Transistor P27A
#14256
|
26455 | СНГ | — |
5 грн.
|
|
— | Transistors P27 germanium alloyed pnp amplifying low-frequency with a normalized noise figure at a frequency of 1 kHz. Designed to amplify low frequency signals. Are issued in the glass-to-metal case with flexible conclusions. | 1.8 | — | — | — | — | — | КТЮ-3-3 | Bipolar | DIP | — | — | — | — | PNP | 30мВт | 100 pieces. | 5В | 6mA | 1МГц | 60 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||
Lamp SMN 6.3-20-2
#14254
|
26453 | СНГ | — |
4 грн.
|
|
— | The subminiature lamp SMN-6.3-20-2 is used in radio and electronic engineering, aviation, rocket technology, medicine, in various instruments and devices as indicator, channel and lighting elements, the dimensions of which are required to be commensurate with the small dimensions of these devices and devices. Rated voltage - 6.3 V Rated electric current - 20 mA Luminous flux: 0.26 lm Average burning time: at least 600 hours Diameter: 3.2mm Length: 9 mm. | 0.12 | — | — | — | — | — | — | — | DIP | — | — | — | — | — | — | 100 pieces. | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||
| 26452 | СНГ | — |
2.50 грн.
|
|
— | Resistor MLT-2 51 Ohm (+/-5%). | 2.5 | Flexible Leads | — | — | 8 | 17 | — | — | DIP | — | — | — | — | — | — | 90pcs | — | — | — | — | — | 51 Ом | 2 W | 5 % | metal film | — | — | — | — | — | — | — | — | — | — | — | — | — | — | ||||||||||||
Capacitor KSO-1 250 V 510 pF
#14249
|
26448 | СНГ | — |
4 грн.
|
— | Capacitors of constant capacity with a mica dielectric, molded into plastic (KSO type), are intended for use in equipment, mainly as separating, blocking and grid capacitors in high-frequency circuits. | 1.1 | Flexible Leads | — | 250 | — | — | — | — | DIP | — | — | — | — | — | — | 500pcs | — | — | — | — | 510pF | — | — | 10 % | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | ||||||||||||
Capacitor KSO-1 250 V 160 pF
#14248
|
26447 | СНГ | — |
4 грн.
|
— | Capacitors of constant capacity with a mica dielectric, molded into plastic (KSO type), are intended for use in equipment, mainly as separating, blocking and grid capacitors in high-frequency circuits. | 1.1 | Flexible Leads | — | 250 | — | — | — | — | DIP | — | — | — | — | — | — | 500pcs | — | — | — | — | 160pF | — | — | 10 % | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | ||||||||||||
Capacitor KSO-1 250 V 62 pF
#14247
|
26446 | СНГ | — |
4 грн.
|
— | Capacitors of constant capacity with a mica dielectric, molded into plastic (KSO type), are intended for use in equipment, mainly as separating, blocking and grid capacitors in high-frequency circuits. | 1.1 | Flexible Leads | — | 250 | — | — | — | — | DIP | — | — | — | — | — | — | 500pcs | — | — | — | — | 62pF | — | — | 5 % | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | ||||||||||||
Capacitor KSO-1 250 V 68 pF
#14246
|
26445 | СНГ | — |
4 грн.
|
— | Capacitors of constant capacity with a mica dielectric, molded into plastic (KSO type), are intended for use in equipment, mainly as separating, blocking and grid capacitors in high-frequency circuits. | 1.1 | Flexible Leads | — | 250 | — | — | — | — | DIP | — | — | — | — | — | — | 500pcs | — | — | — | — | 68pF | — | — | 10 % | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | ||||||||||||
Capacitor KSO-1 250 V 330 pF
#14245
|
26444 | СНГ | — |
4 грн.
|
— | Capacitors of constant capacity with a mica dielectric, molded into plastic (KSO type), are intended for use in equipment, mainly as separating, blocking and grid capacitors in high-frequency circuits. | 1.1 | Flexible Leads | — | 250 | — | — | — | — | DIP | — | — | — | — | — | — | 500pcs | — | — | — | — | 330pF | — | — | 10 % | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | ||||||||||||
Capacitor KSO-1 250 V 620 pF
#14244
|
26443 | СНГ | — |
4 грн.
|
— | Capacitors of constant capacity with a mica dielectric, molded into plastic (KSO type), are intended for use in equipment, mainly as separating, blocking and grid capacitors in high-frequency circuits. | 1.1 | Flexible Leads | — | 250 | — | — | — | — | DIP | — | — | — | — | — | — | 500pcs | — | — | — | — | 620pF | — | — | 10 % | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | ||||||||||||
Capacitor KSO-1 250 V 82 pF
#14242
|
26441 | СНГ | — |
4 грн.
|
— | Capacitors of constant capacity with a mica dielectric, molded into plastic (KSO type), are intended for use in equipment, mainly as separating, blocking and grid capacitors in high-frequency circuits. | 1.1 | Flexible Leads | — | 250 | — | — | — | — | DIP | — | — | — | — | — | — | 500pcs | — | — | — | — | 82pF | — | — | 5 % | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | ||||||||||||
Capacitor KSO-1 250 V 220 pF
#14241
|
26440 | СНГ | — |
4 грн.
|
— | Capacitors of constant capacity with a mica dielectric, molded into plastic (KSO type), are intended for use in equipment, mainly as separating, blocking and grid capacitors in high-frequency circuits. | 1.1 | Flexible Leads | — | 250 | — | — | — | — | DIP | — | — | — | — | — | — | 500pcs | — | — | — | — | 220pF | — | — | 5 % | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | ||||||||||||
Capacitor KSO-1 250 V 120 pF
#14240
|
26439 | СНГ | — |
4 грн.
|
— | Capacitors of constant capacity with a mica dielectric, molded into plastic (KSO type), are intended for use in equipment, mainly as separating, blocking and grid capacitors in high-frequency circuits. | 1.1 | Flexible Leads | — | 250 | — | — | — | — | DIP | — | — | — | — | — | — | 500pcs | — | — | — | — | 120pF | — | — | 5 % | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — |
