Brand «CHINA»

Results: 1764

MPN Article Brand In stock Price Discounts Quantity Description Weight g. Mounting type Factory packaging Plug or socket Number of contacts Mechanical installation Type Board type
24788 CHINA Unavailable
3 грн.
10+2,70 грн.
50+2,55 грн.
100+2,40 грн.
0 pcs base size 12 x 12 mm base height with button stem 12.0 mm stem height 8.5 mm 1.1 DIP 200pcs — — — — —
24783 CHINA Unavailable
50 грн.
0 pcs Tester probes CAT.II 1000V 10A (1 meter) type 1 75 — 1 PC. — — — — —
24781 CHINA Unavailable
36 грн.
0 pcs The Class D low voltage audio amplifier is designed to amplify the device's audio signals. The module can be used in a portable audio system, laptops, small car speakers, etc. This module is well suited for replacing failed analog amplifiers in portable audio devices. The amplifier is based on the PAM8403 chip from Power Analog Microelectronics. The module is a class D amplifier. It also has low heat dissipation and small size. The output power is up to 3W per channel. At this power, 10% of non-linear distortion is present. The amplifier has low noise and high efficiency, which allows it to be connected to small devices. The microcircuit has a trimming resistor with which you can adjust the sound level of the device. The amplifier board has 9 pins: L: left channel of the connected device G: "ground" R: right channel of the connected device POWER: amplifier power supply voltage 2.5 - 5 V ROUT: right channel LOUT: left channel The polarity of connecting channels and power supply is displayed on the amplifier board. Power is supplied to the amplifier from an external power supply. The power supply voltage range of the audio amplifier is from 2.5 to 5 V. The amplifier does not have reverse polarity protection!!! 10 — 1 PC. — — — — —
24780 CHINA Unavailable
28 грн.
0 pcs The SX1308 boost converter is used to change the DC output voltage. The module can be used as a stabilized power source for video cameras, LEDs, lights and other electrical devices. The module board is designed on the basis of the SX1308 chip (according to the boost topology), a trimmer resistor and other components that ensure the correct operation of the voltage converter. The module chip is made in the "SOT23-6" package. The advantages of this voltage converter are small size, low heat generation and the ability to operate from 2 V. Due to its small size, the converter can be used in portable chargers or other small devices. The efficiency (coefficient of performance) of the converter is up to 95%. The maximum load current of the power supply must not exceed 2 A. The value of the DC output voltage is adjusted using a multi-turn trimmer with a resistance of 50 kOhm. The terminals of the external power supply and the device are connected to the terminals of the converter using soldering. Module pin assignments: IN+: input voltage 2 - 24 V IN-: "ground" OUT+: output voltage 5 - 28 V OUT-: device common wire Power is supplied from the power supply or other external power source. The DC input voltage range is 2 to 24V and the output voltage range is 5 to 28V. When connecting an external power supply, remember that the input voltage must be lower than the output voltage. 3 — 1 PC. — — — — —
24779 CHINA Unavailable
6 грн.
10+5,40 грн.
50+5,10 грн.
100+4,80 грн.
0 pcs Key switch 6A 250V rectangular without indication. 2.9 DIP 250pcs — — — — —
24778 CHINA Unavailable
4 грн.
10+3,60 грн.
50+3,40 грн.
100+3,20 грн.
0 pcs Key switch 2A 250V rectangular without indication. 1.3 DIP 250pcs — — — — —
24776 CHINA Unavailable
39 грн.
0 pcs The digital voltmeter is designed to measure the voltage of an electrical circuit. A feature of the module is the small size of its indication. This digital voltmeter can be used in the power supply, on-board computer of the car and other devices that need visualization of voltage values. It can also be used to control the voltage of chargers. The current voltage value is displayed on a seven-segment display. The measured voltage range is from 0 to 100 V. The measurement error of the device is ±1%. When measuring power supply voltage up to 30 V, it can be connected directly to the measured circuit. If the voltage of the measured source is higher than 30 V, then an external power supply with a voltage of 4 to 30 V must be used to power the device. The meter has 3 wires: Red wire: 4 - 30 V digital voltmeter power supply Black wire: "ground" Yellow wire: external power supply voltage measurement 0 - 100 V The digital voltmeter is already calibrated. Additional calibration of the digital voltmeter is carried out using a trimmer resistor, which is located on the reverse side of the board. 5.7 — 1 PC. — — — — —
24773 CHINA Unavailable
15 грн.
0 pcs 50x70mm, one-sided with a mask, thickness 1.6mm, patches with holes pitch 2.54 10 DIP 50pcs — — — — Односторонние
24769 CHINA Unavailable
65 грн.
0 pcs TP101 digital probe thermometer is widely used in laboratories, food preparation, water or air temperature measurement, etc. The thermometer is supplied in a transparent tube with a diameter of 24 mm and a length of 24.5 cm. The length of the probe is 150 mm. Temperature measurement range: from -50 to +300 °С. Power is supplied from one LR44 element (included). 50 — 1 PC. — — — — —
24768 CHINA Unavailable
70 грн.
0 pcs TP101 digital probe thermometer is widely used in laboratories, food preparation, water or air temperature measurement, etc. The thermometer is supplied in a transparent tube with a diameter of 24 mm and a length of 24.5 cm. The length of the probe is 150 mm. Temperature measurement range: from -50 to +300 °С. Power is supplied from one LR44 element (included). The device is made in a portable case, and the probe of the thermometer is made of stainless steel. The current temperature readings are displayed using the LCD display. The thermometer has an automatic shutdown that works after 15 hours of inactivity. The measuring device has a very wide range of measured temperatures, which ranges from -50 to 300 °C. The TP101 thermometer has a large number of functions that are controlled using 4 buttons located on the device body: ON|OFF: enable (disable) the digital thermometer °C|°F: change units HOLD: Holds the results on the display when the button is pressed once. When pressed again, shows the current ambient temperature MAX|MIN: displays the maximum (minimum) value of the recorded temperature The device is powered by one LR44 battery (included). In order to install the power supply, you need to remove the power compartment cover. Then install the battery. Polarity must be observed when installing the power supply. After installing the battery, you need to screw on the battery cover. It is recommended to place the probe into the measuring medium for at least 1 cm. It should be remembered that the measuring device must not be placed in a microwave oven, oven, otherwise the device will fail. The kit for the TP101 digital thermometer includes a tube for storing the device. 50 — 1 PC. — — — — —
24765 CHINA Unavailable
19 грн.
10+17,10 грн.
30+15,20 грн.
0 pcs Ф=34mm; h=16mm; inner diameter 6mm(with clamping screw). 13 — 50pcs — — — — —
24754 CHINA Unavailable
3 грн.
10+2,70 грн.
30+2,40 грн.
0 pcs Axle diameter: 6mm Height: 17mm Bottom Diameter: 15mm Top diameter: 10mm 1 — 100 pieces. — — — — —
24741 CHINA Unavailable
3 грн.
10+2,70 грн.
50+2,55 грн.
100+2,40 грн.
0 pcs base size 12 x 12 mm base height with button stem 18.0 mm stem height 14.5 mm 1.1 DIP 200pcs — — — — —
24740 CHINA Unavailable
3 грн.
10+2,70 грн.
50+2,55 грн.
100+2,40 грн.
0 pcs base size 12 x 12 mm base height with button stem 17.0 mm stem height 13.5 mm 1.1 DIP 200pcs — — — — —
24739 CHINA Unavailable
3 грн.
10+2,70 грн.
50+2,55 грн.
100+2,40 грн.
0 pcs base size 12 x 12 mm base height with button stem 11.5 mm stem height 8.0 mm 1.1 DIP 200pcs — — — — —
24737 CHINA Unavailable
3 грн.
10+2,70 грн.
50+2,55 грн.
100+2,40 грн.
0 pcs base size 12 x 12 mm base height with button stem 7.0 mm stem height 3.5 mm 0.9 DIP 200pcs — — — — —
24736 CHINA Unavailable
3 грн.
10+2,70 грн.
50+2,55 грн.
100+2,40 грн.
0 pcs base size 12 x 12 mm base height with button stem 5 mm stem height 1.5 mm 0.9 DIP 200pcs — — — — —
24694 CHINA Unavailable
196 грн.
0 pcs The digital voltmeter-ammeter is designed to measure the DC voltage and current of the connected power source. The module can be used in power supplies that require visualization of output parameters. It can also be used to measure voltage and current readings within a circuit of devices. The module consists of two seven-segment red indicators. The voltage measurement range is from 0 to 99.9 V, and the current strength is from 0 to 100 A. The accuracy of the device readings is ± 1%. The measurement update rate is about 200 ms/time. The meter board has 5 pins: red wire: external device current measurement 0 - 100 A (with shunt) black wire: "ground" yellow thin wire: external device voltage measurement 0-100 V red thin wire: power supply of the device with a voltage of 4.5 - 30 V black thin wire: "ground" There are two ways to connect a digital voltmeter-ammeter: If the voltage of the measured power source is in the range from 4.5 to 30 V and has a common wire with the meter, then the device can be connected to its power supply. If the voltage of the measured source is higher than 30 V, it is necessary to use an external power supply with a voltage of 4.5 to 30 V to power the device. This meter is sold already calibrated. If necessary, calibrate the device, you need to use two tuning resistors. Using the I_ADJ potentiometer, the accuracy of the current measurement is adjusted, and the variable resistor V_ADJ changes the accuracy of the DC voltage. 150 — 1 PC. — — — — —
24693 CHINA Unavailable
140 грн.
0 pcs The digital voltmeter-ammeter is designed to measure the DC voltage and current of the connected power source. The module can be used in power supplies that require visualization of output parameters. It can also be used to measure voltage and current readings within a circuit of devices. The module consists of two seven-segment red indicators. The voltage measurement range is from 0 to 99.9 V, and the current is from 0 to 50 A. The accuracy of the device readings is ± 1%. The measurement update rate is about 200 ms/time. The meter board has 5 pins: red wire: external device current measurement 0 - 50 A (with shunt) black wire: "ground" yellow thin wire: external device voltage measurement 0-100 V red thin wire: power supply of the device with a voltage of 4.5 - 30 V black thin wire: "ground" There are two ways to connect a digital voltmeter-ammeter: If the voltage of the measured power source is in the range from 4.5 to 30 V and has a common wire with the meter, then the device can be connected to its power supply. If the voltage of the measured source is higher than 30 V, it is necessary to use an external power supply with a voltage of 4.5 to 30 V to power the device. This meter is sold already calibrated. If necessary, calibrate the device, you need to use two tuning resistors. Using the I_ADJ potentiometer, the accuracy of the current measurement is adjusted, and the variable resistor V_ADJ changes the accuracy of the DC voltage. 75 — 1 PC. — — — — —
24692 CHINA Unavailable
90 грн.
0 pcs The digital voltmeter-ammeter is designed to measure the DC voltage and current of the connected power source. The module can be used in power supplies that require visualization of output parameters. It can also be used to measure voltage and current readings within a circuit of devices. The module consists of two seven-segment red indicators. The voltage measurement range is from 0 to 99.9 V, and the current is from 0 to 9.99 A. The accuracy of the device readings is ± 1%. The measurement update rate is about 200 ms/time. This voltmeter-ammeter features a built-in shunt, which eliminates the need for an external shunt to measure current. The meter board has 5 pins: red wire: external device current measurement 0 - 9.99 A black wire: "ground" yellow thin wire: external device voltage measurement 0-100 V red thin wire: power supply of the device with a voltage of 4.5 - 30 V black thin wire: "ground" There are two ways to connect a digital voltmeter-ammeter: If the voltage of the measured power source is in the range from 4.5 to 30 V and has a common wire with the meter, then the device can be connected to its power supply. If the voltage of the measured source is higher than 30 V, it is necessary to use an external power supply with a voltage of 4.5 to 30 V to power the device. This meter is sold already calibrated. If necessary, calibrate the device, you need to use two tuning resistors. Using the I_ADJ potentiometer, the accuracy of the current measurement is adjusted, and the variable resistor V_ADJ changes the accuracy of the DC voltage. 17.5 — 1 PC. — — — — —
24691 CHINA Unavailable
60 грн.
0 pcs Ucc=3.5-7V, I=0-3A, 4 digital digits. 16 — 1 PC. — — — — —
24614 CHINA Unavailable
76 грн.
0 pcs 48х28х15.2mm, Ucc=3V, -50*С+70*С(step=0.1*C), 10%-99%(RH), sensor wire length 1m, batteries included. 34 Clamp 20pcs — — — — —
24613 CHINA Unavailable
56 грн.
0 pcs 45x25x13mm, -50+70*C, 10%-99%(RH), sensors on board, batteries included. 19 Clamp 20pcs — — — — —
24612 CHINA Unavailable
56 грн.
0 pcs 45x25x13mm, -50+70*C, 10%-99%(RH), sensors on board, batteries included. 19 Clamp 20pcs — — — — —
24484 CHINA Unavailable
2.40 грн.
10+2,28 грн.
50+2,16 грн.
100+1,92 грн.
0 pcs blue, pitch 5.0mm. 1.3 DIP 1000pcs Socket 2 For a fee Terminal block —
24483 CHINA Unavailable
2.50 грн.
10+2,37 грн.
50+2,25 грн.
100+2 грн.
0 pcs Green pitch 5.0mm. 1.5 DIP 1000pcs Socket 2 For a fee Terminal block —
24444 CHINA Unavailable
45 грн.
10+40,50 грн.
50+38,25 грн.
100+36 грн.
200+33,75 грн.
0 pcs Battery compartment HOLDER 4 x 18650 with contacts for mounting on the board. 25 — 50pcs — — — — —
24443 CHINA Unavailable
41 грн.
10+36,90 грн.
50+34,85 грн.
100+32,80 грн.
200+30,75 грн.
0 pcs Battery compartment HOLDER 3 x 18650 with contacts for mounting on the board. 22 — 50pcs — — — — —
24442 CHINA Unavailable
13 грн.
10+11,70 грн.
50+11,05 грн.
100+10,40 грн.
200+9,75 грн.
0 pcs Battery compartment 3xAAA flat with solder pins. 8 — 50pcs — — — — —
24441 CHINA Unavailable
30 грн.
10+27 грн.
50+25,50 грн.
100+24 грн.
200+22,50 грн.
0 pcs Battery compartment HOLDER 2 x 18650 with contacts for mounting on the board. 14 — 50pcs — — — — —