Devices, products, materials
Filter layout:
|
- Sound
- Radiators
- Electric motors
- Power supplies
- Breadboards
- Heat-shrink tubing
- cores, magnets
- Radio Kits
- Cables, cords, adapters
- Corps
- Everything for soldering
- Tool
- Finished goods
- Devices
- fasteners
- miscellanea
| MPN | Article | Brand | In stock | Price | Discounts | Quantity | Description | Weight g. | Mounting type | Power | Factory packaging | Working current, A | Board type | Output voltage | Moisture protection | Height (length), mm | Outside diameter, mm | Inner diameter, mm | Permeability | Core type | Material | Item type | Width, mm | Thickness, mm |
|---|
| 26413 | СНГ | — |
14 грн.
|
|
— | M2000NM1-36, K28x16x9, Ring ferrite core. | 17.5 | — | — | 360pcs | — | — | — | — | 9 | 28 | 16 | М2000НМ | Ring | Ferrite | — | — | — | ||||||||||||
| 26415 | CHINA | — |
8 грн.
|
— | TDB1223-05F 12mm, 5V, sound emitter (buzzer) with generator. Ф12х9.5mm, 3-6V, 85dB, 2.3+-0.4kHz. | 1.8 | DIP | — | 100 pieces. | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||||
| 26416 | CHINA | — |
8 грн.
|
— | Ф12х9.5mm, 2-4V, 85dB, 2.3+-0.4kHz. | 1.8 | DIP | — | 100 pieces. | — | — | — | — | — | — | — | — | — | — | Buzzer | — | — | |||||||||||||
| 26467 | СНГ | — |
3 грн.
|
— | Flange for fastening a powerful transistor to a radiator. The flange is suitable for mounting the following transistors: P213-217 P605, P701 And some other semiconductor products. | 1 | — | — | 100 pieces. | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||||
| 26483 | СНГ | — |
25 грн.
|
|
— | M400NN-19, 100x20x4, Ferrite bar (plate). | 37 | — | — | 100 pieces. | — | — | — | — | 100 | — | — | М400НН | Plate | Ferrite | — | 20 | 4 | ||||||||||||
| 26668 | СНГ | — |
94 грн.
|
|
— | M350NNI, K61x36x13, Ring ferrite core. | 120 | — | — | 30pcs | — | — | — | — | 13 | 61 | 36 | М350НН | Ring | Ferrite | — | — | — | ||||||||||||
| 26670 | СНГ | — |
12 грн.
|
|
— | M600NN, K32x20x6, Ring ferrite core. | 15 | — | — | 40pcs | — | — | — | — | 6 | 32 | 20 | М600НН | Ring | Ferrite | — | — | — | ||||||||||||
| 26672 | CHINA | — |
24 грн.
|
— | 60x80mm, double-sided with a mask, thickness 1.6mm, patches with holes pitch 2.54. | 17.5 | DIP | — | 20pcs | — | Духсторонние | — | — | — | — | — | — | — | — | — | — | — | |||||||||||||
| 26731 | — | — |
50 грн.
|
|
— | M2000NM, K65x40x6, Ring ferrite core. | 63 | — | — | 100 pieces. | — | — | — | — | 6 | 65 | 40 | М2000НМ | Ring | Ferrite | — | — | — | ||||||||||||
| 26732 | — | — |
50 грн.
|
|
— | M1000NM, K65x40x6, Ring ferrite core. | 63 | — | — | 100 pieces. | — | — | — | — | 6 | 65 | 40 | М1000НМ | Ring | Ferrite | — | — | — | ||||||||||||
| 26733 | СНГ | — |
92 грн.
|
|
— | M100NN, K80x50x7.5, Ring ferrite core. | 120 | — | — | 50pcs | — | — | — | — | 7,5 | 80 | 50 | М100НН | Ring | Ferrite | — | — | — | ||||||||||||
| 26734 | СНГ | — |
13 грн.
|
|
— | M3000NM, K31x18x7, Ring ferrite core. | 16 | — | — | 24pcs | — | — | — | — | 7 | 31 | 18 | М3000НМ | Ring | Ferrite | — | — | — | ||||||||||||
| 26851 | MTK | — |
164 грн.
|
|
— | 126x47x30mm, UPS=~175-265V, 60W(12V,5A), IP20, metal case. | 128 | — | 60Вт | 1 PC. | 5 | — | 12V | IP20 | — | — | — | — | — | — | — | — | — | ||||||||||||
| 26852 | MTK | — |
271 грн.
|
|
— | 187x47x35mm, UPS=~175-265V, 100W(12V,8.3A), IP20, metal case. | 230 | — | 100Вт | 1 PC. | 8.33 | — | 12V | IP20 | — | — | — | — | — | — | — | — | — | ||||||||||||
| 26853 | MTK | — |
290 грн.
|
|
— | 187x47x35mm, UPS=~175-265V, 120W(12V,10A), IP20, metal case. | 235 | — | 100Вт | 1 PC. | 10 | — | 12V | IP20 | — | — | — | — | — | — | — | — | — | ||||||||||||
| 26891 | CHINA | — |
114 грн.
|
|
— | Power supply 12V 2A plug 5.5x2.1 stabilized pulse. | 80 | — | 24Вт | 1 PC. | 2 | — | 12V | — | — | — | — | — | — | — | — | — | — | ||||||||||||
| 26895 | CHINA | — |
7 грн.
|
— | Breadboard printed circuit board on getinax. From the side of the components, the markup was made by the silk-screen method. On the soldering side, the board is covered with a preservative flux that protects the mounting patches from oxidation. | 5 | DIP | — | 50pcs | — | Односторонние | — | — | — | — | — | — | — | — | — | — | — | |||||||||||||
| 26896 | CHINA | — |
33 грн.
|
— | 6 - 28 volt to 5.2 volt DC-DC converter with two USB outputs and a maximum operating current of 3 amperes. Designed to power and charge mobile devices via USB interface from the car's on-board network, network power supplies of suitable power, accumulators and batteries. Specifications: Input voltage: 6 - 28 V Output voltage: 5.2V Maximum load current: 3A Efficiency: 96% (max) Operating temperature range: -40°C - +85°C Dimensions: 28 x 32 x 8 mm. | 4 | — | — | 1 PC. | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||||
Photo relay XH-M131-12V
#14679
|
26897 | CHINA | — |
70 грн.
|
— | The photo relay module activates the relay at a certain light intensity. The photoresistor, which is connected with a cable 20 cm long, determines the level of illumination. When light hits the photoresistor, it changes its resistance. Because of this, the voltage in the circuit changes, which signals the amount of light. The module can be used in projects that require the relay to be triggered in the presence of a given light brightness (street lighting, turning on car headlights, etc.). The board has an LM393 comparator that determines the light intensity across the photoresistor. The sensitivity level of the sensor can be adjusted using a trimmer resistor. The module does not have on and off timers. The relay is activated when the specified sensor sensitivity threshold is exceeded. If the illumination often changes its state, then the relay will operate frequently. The photoresistor is connected to the module using the COS pin. There are 2 terminal blocks on the module board: J1 (terminal 1): relay power is connected J2 (terminal 2): load connected There are also 2 LEDs on the board: D1: signals the power supply of the module D2: lights up when the specified sensor sensitivity threshold is exceeded You can supply power to the module board from an external power source. The module supply voltage is 5 V. The relay board switches voltage up to 250 V and withstands current up to 10 A. Module Specifications: Chip LM393 Relay SRD-12VDC-SL-C Maximum load 10A, 250V Module supply voltage, V 12 Wire length, cm 20 Operating temperature, °C -25 ... +70 Module dimensions, mm 55 x 30 x 20. | 21 | — | — | 1 PC. | — | — | — | — | — | — | — | — | — | — | — | — | — | ||||||||||||
| 26899 | CHINA | — |
54 грн.
|
— | BMS (Battery Management System) is a battery management system that is designed to monitor the condition of batteries, control the process of charging /discharging batteries, etc. Two batteries (18650) can be connected to the charge-discharge controller module HX-2S-JH10 at the same time. The features of this charge controller are: protection against short circuit (short circuit) and protection against overdischarge (overcharge). The discharge current of this BMS controller is 8A, and the quiescent current reaches up to 10uA. The battery charge is turned off when the voltage reaches 4.25 - 4.35 V, and the discharge occurs when the voltage drops to 2.7 - 3.0 V. The battery charge-discharge controller module HX-2S-JH10 has 5 outputs: B+: battery positive B-: battery negative BM: battery assembly midpoint P-: charge/discharge negative terminal P+ charge/discharge positive terminal When the maximum allowable value of the supply voltage is exceeded, the charge controller activates the "protection" mode. In order to restore the operation of the module, it is necessary to reapply voltage to the BMS board input or wait for some time until the charge controller turns off the protection automatically. The module supply voltage range is from 8.4 to 9.0 V. For charging, you can use a boost converter with a current limiter. Please note that this module is not a charger. Module Specifications: Model HX-2S-JH10 Maximum battery charge voltage, V 4.25 ... 4.35 Battery discharge voltage, V 2.7 ... 3.0 Supply voltage, V 8.4 ... 9.0 Discharge current, A 8 Discharge current maximum short-term, A 10 Module dimensions, mm 40 x 16 x 4. | 5 | — | — | 1 PC. | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||||
| 26900 | CHINA | — |
29 грн.
|
— | BMS (Battery Management System) is a battery management system that is designed to monitor the condition of batteries, control the process of charging / discharging batteries, etc. Two batteries (18650) can be connected to the charge-discharge controller module HX-2S-A2 at the same time. The features of this charge controller are: protection against short circuit (short circuit) and protection against overdischarge (overcharge). Also, a feature of the module is to turn off the power supply for the batteries when the maximum capacity of at least one battery is reached. The maximum operating current of this BMS controller is 5 A, and the quiescent current does not exceed 10 μA. The battery charge is turned off when the voltage reaches 4.25 - 4.35 V, and the discharge occurs when the voltage drops to 2.5 - 3.0 V. The battery charge-discharge controller module HX-2S-S01 has 5 outputs: B+: battery positive B-: battery negative BM: battery assembly midpoint P-: charge/discharge negative terminal P+ charge/discharge positive terminal When the maximum allowable value of the supply voltage is exceeded, the charge controller activates the "protection" mode. In order to restore the operation of the module, it is necessary to reapply voltage to the BMS board input or wait for some time until the charge controller turns off the protection automatically. The module supply voltage range is from 8.4 to 9 V. Please note that this module is not a charger! Model HX-2S-A2 Maximum battery charge voltage, V 4.25 ... 4.35 Battery discharge voltage, V 2.5 ... 3.0 Supply voltage, V 8.4 ... 9 Operating current, A 5 Maximum operating current, A 7 Module dimensions, mm 17.5 x 17.5 x 3.2. | 2 | — | — | 10 pieces. | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||||
| 26901 | CHINA | — |
72 грн.
|
— | The LM2596S module is a buck converter that converts the input voltage and current to the required values. The module can be used to power LEDs, charge batteries, etc. Can also be used as a simple laboratory power supply with adjustable current and voltage. The module board is designed based on the LM2596S chip. The microcircuit has 8 pins and is assembled in the "TO-263" package. The LM2596S is a DC buck converter. Also on the module board there are 3 trimmers (SW1, SW2, SW3): SW1: responsible for adjusting the output voltage SW2: sets the allowable value of the output current SW3: used to set the battery full charge voltage There are 4 outputs on the module board. The IN- (ground) and IN+ (input voltage) pins are used to connect the input voltage source. To connect the LM2596S module to external devices, the output voltage terminals OUT+ (output voltage) and OUT- (“ground”) are used. The input voltage range is from 5 to 35 V, respectively, at the output of the converter from 1.25 to 30 V. There are no terminal blocks on the module board, so the terminals of the external power source and the device are connected by soldering. The LM2596S converter board has 3 indicators: LED 1: lights up when the battery is charging LED 2: lights up when charging is completed LED 3: signals the power supply of the module board The maximum output current value is 3 A. When the load exceeds 15 W, it is necessary to install a heatsink for the LM2596S chip. The radiator is installed in a special place with metallization on the back of the chamber. There are 4 holes for easy mounting of the module. Module Specifications: Chip LM2596S Input voltage, V 5 ... 35 Output voltage, V 1.25 ... 30 Output current, A 3 Module dimensions, mm 48 x 24 x 14. | 12 | — | — | 1 PC. | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||||
| 26902 | CHINA | — |
125 грн.
|
— | This MP3 module with remote control is designed to play MP3, APE and WAV audio files. The device has a built-in Bluetooth module and a digital FM tuner. The MP3 module is designed to create audio systems or improve audio complexes that are not capable of playing MP3 files (APE and WAV). The textual information of the device is displayed on a bright seven-segment display. There are 4 control buttons on the MP3 player board. Button assignments: VOL-: volume down (switch audio files) PLAY/PAUSE: pauses or plays audio files (in FM mode, changes the frequency of the signal) VOL+: increase volume (switch sound files) MODE: selects the music playback mode When using the USB (TF) mode, the volume level is changed by long pressing the VOL- and VOL + buttons, and to switch the sound file, you need to briefly press them. The PLAY/PAUSE button in this mode simply stops or resumes playback. In FM mode, this button has different properties: when pressed briefly, it starts scanning the range to a station with good reception, and when held for a long time, playback resumes or audio signals are stopped. With the help of TF, USB and AUX connectors, external media of sound files are connected. The AUX jack is a serial input for connecting an analog signal source using a 3.5 mm mini jack. On the board of the device there are pins for connecting an external antenna, which serves as an amplifier for the FM receiver. This MP3 player has 3 modes of operation: FM: Receives FM radio stations Bluetooth: plays sound files via Bluetooth protocol USB, TF: plays audio files stored on a USB stick or memory card When the FM mode is activated, the device automatically starts searching for an operating frequency in the range from 88 to 108 MHz. The MP3 player comes with a remote control (remote control), which allows you to control the device at a distance of 1 to 10 m. The infrared sensor located near the LCD display receives the remote control signals. The remote control must be powered by a CR2032 battery. There are 21 function keys on the remote control. Control buttons assignments: ON/OFF: turns the device on or off MODE: selects the music playback mode MUTE: turns off (on) the sound PLAY/PAUSE: pause or play sound files BACK: returns the previous sound file NEXT: plays the next audio file EQ: selects the equalizer mode (ROCK, JAZZ, Classic, NORMAL, BASS, POP) VOL-: volume down VOL+ increases the volume U/SD/AUX: Change media type 0 - 9: control buttons The device is powered by an external DC power source in the range from 5 to 12 V. A voltage regulator of 5 V is installed at the input of the player. MP3 module kit consists of: MP3 player, remote control, and wires with connectors for connection. When connecting the power, be extremely careful! The module does not have reverse polarity protection! | 55 | — | — | 1 PC. | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||||
| 26903 | CHINA | — |
135 грн.
|
— | This module is a DC voltage buck converter. The task of the module is to convert the input voltage to the required value of the output voltage. The converter can be used as: a power supply, a power supply for high-power LEDs, etc. The converter is designed based on the XL4016 chip. The chip is mounted on a heatsink and isolated for user safety. The microcircuit has protection against short circuit and overheating. When the overheating protection is triggered, the module automatically cuts off the input voltage. The efficiency of the converter is 93%. The maximum output power of the voltage converter is 100 W, and the conversion frequency is 180 kHz. Changing the DC output voltage is carried out using a variable resistor, on the handle of which a cap is installed for convenient parameter adjustment. There are 2 terminal blocks (4 pins) for connecting an external power source and a device: IN+: input supply voltage 4 - 40 V IN-: "ground" OUT+: output supply voltage 1.25 - 36 V OUT-: "ground" There are also 2 LEDs on the board: L: indicates that the input voltage is applied to the module R: Indicates that output voltage is being supplied to the device The maximum output current of the module is 8 A. The installed heatsink can be replaced with a more powerful one. Power is supplied to the converter from an external power source. The input supply voltage range is from 4 to 40 V, and the output voltage range is from 1.25 to 36 V. Converter Specifications: Chip XL4016 Input voltage, V 4 ... 40 Output voltage, V 1.25 ... 36 Maximum load current, A 8 Switching frequency, kHz 180 Maximum output power, W 100 Efficiency, % 93 Operating temperature, °C -40 ... 125 Module dimensions, mm 61 x 41 x 28. | 75 | — | — | 1 PC. | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||||
| 27246 | CHINA | — |
91 грн.
|
|
— | Power supply 5V 2A plug 3.5x1.4 stabilized pulse. | 75 | — | 10Вт | 1 PC. | 2 | — | 5V | IP20 | — | — | — | — | — | — | — | — | — | ||||||||||||
| 27247 | CHINA | — |
50 грн.
|
— | Vacuum desoldering pump (solder suction) is designed to remove solder during the assembly of electronic components. Represents the vacuum pump with a tip for a retraction of the melted solder from the processed surface. The vacuum pump is implemented in the form of a spring-loaded piston with a lock of its position in the cocked position, with the tip of the inlet channel in the form of a constriction. The principle of operation of a vacuum desoldering pump (solder suction): the solder is melted at the place of soldering, the cocked suction is brought, the release button of the latch is pressed, the spring pushes the piston, the pressure drop sucks the solder inward, freeing the parts on the board. All metal structures of the vacuum desoldering pump (solder suction) are ideal for intensive use, including in the production of rework and repair. The tool can be easily disassembled for quick cleaning. The vacuum desoldering pump ensures easy and safe dismantling of connections, printed circuit boards and components. | 100 | — | — | 1 PC. | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||||
| 27282 | — | — |
5,000 грн.
|
— | There are times when you need to connect a discrete sensor to the controller, or simply use the button to control a remote pump or lighting. For example, connect the PR-200 output to a remote relay, and pulling wires is either not profitable (if there is only one sensor), or a long distance. This device was created for these purposes. MDS-R1 modules, together with ATR1-433 antenna modules, are designed for two-way wireless transmission of the status of contacts of sensors, relays, buttons and other devices with a “dry contact” or “open collector” type output. The input and output discrete channels are galvanically isolated. The device works stably even in a heavily loaded air. This is achieved by using highly efficient LoRa radio technology in conjunction with digital signal processing. Additional reliability is ensured by the fact that a floating algorithm is used, with a random time range, and this eliminates interference from the same type of equipment. The device constantly monitors the presence of communication between the modules, if any accident occurs on the transmitting side, or the transmitter breaks down, then the "stop" command will automatically work on the receiving side after 1 minute. This function can be used at facilities where it is necessary to control an emergency power outage or theft of lead wires at the facility. If you install the module on the final electric pole, then if the wire is damaged at any point, you can monitor the state of the power line. Application: Control of remote wells in water supply systems Systems for automation and data collection from remote objects Technological and fire alarm systems Power supply monitoring systems at remote sites Anti-vandal protection of remote objects Smart home systems Radio controlled devices Specifications: Supply voltage: 11 ÷ 56 V Current consumption: no more than 150 mA Rated load current on discrete output: 1A (220V) Number of input discrete channels: 1 Number of output discrete channels: 1 Input channel galvanic isolation: 2000 V Galvanic isolation of the output channel: 2000 V The resistance of the loop line to the sensors - no more than 2.7 kOhm Number of MDS-R1 module ID addresses: 32 Number of guaranteed non-repeatable system ID addresses (cannot be changed by the user): 131070 Encryption keys: 65535 System baud rate: 2400 bps Operating frequency range: 433.1 - 434.750 MHz (license-free band) Transmitter output power: no more than 10 mW Receiver sensitivity during LoRa modulation: -147 dBm (0.01 μV) Operating temperature range of modules: from -30 to +65 °С Communication range: 3-5 km. (depending on line of sight) Cable length for connecting the ATR1-433 radio module via the "digital current loop" interface - up to 150 m Overall dimensions of the MDS-R1 module: 90x53x58 mm Overall dimensions of the ATR1-433 module: 144x66x56 mm The user manual can be downloaded from this link. Wireless Connect User Guide | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | |||||||||||||
| 27372 | CHINA | — |
17 грн.
|
|
— | Battery compartment HOLDER 1 x 18650 with contacts for mounting on the board. | 7.5 | DIP | — | 50pcs | — | — | — | — | — | — | — | — | — | — | — | — | — | ||||||||||||
| 27373 | CHINA | — |
15 грн.
|
|
— | Battery compartment 6F22 (Krone) open with wires. | 7 | — | — | 100 pieces. | — | — | — | — | — | — | — | — | — | — | — | — | — | ||||||||||||
| 27374 | CHINA | — |
7 грн.
|
|
— | 1xAA battery compartment with wires. | 4 | — | — | 100 pieces. | — | — | — | — | — | — | — | — | — | — | — | — | — |
