Domestic relays
Filter layout:
|
| MPN | Article | Brand | In stock | Price | Discounts | Quantity | Description | Weight g. | Working voltage, V | Mounting type | Factory packaging | Working current, A | Number of windings | Polarization | Winding resistance, Ohm | Operating current no more | Drop-out current not less | Maximum switching voltage | Winding supply current | Contact set |
|---|
| 21369 | СНГ | 23610 шт |
20 грн.
|
Relay RES-60 is sealed, two-position, single-stable, DC-powered, with two changeover contacts. Designed for switching electrical circuits of direct and alternating current. | 3.5 | 3,5…4,5 | DIP | 40pcs | 0.5 | 1 | neutral | 36 | 60mA | 13mA | 120v | Constant | — | ||||
Relay RES44 RS4.569.251
#9862
|
21641 | СНГ | 2933 шт |
25 грн.
|
DC reed relays of the RES type are designed for switching DC and AC electrical circuits with a frequency of up to 10 kHz. Reed relays have a number of advantages over electromagnetic ones: - complete sealing of the contact allows them to be used in various conditions of humidity and dustiness, reliable operation in a wide temperature range - high speed allows the use of reed relays at a high switching frequency - relays have a high dielectric strength of the contact gap - galvanic isolation of switched circuits and control circuits of reed relays - reed relays have a simple design and weight Technical specifications AC/DC winding supply current Number of windings 2 Operation voltage, no more than, V 3 Release voltage, not less than, V 1 Winding resistance, Ohm 190 Minimum operating voltage, V 10.8 Rated operating voltage, V 3-6-12 (depends on the inclusion of the windings) Maximum operating voltage, V 14 Maximum switched DC voltage, V 30 Maximum switched direct current, A 0.1 Response time, ms 1 Release time, ms 0.3 Insulation resistance, MOhm 500 Maximum resistance of electrical contacts, Ohm 0.2 Time between failures, not less than, cycles x10^6 100 Operating temperature, С -60…100 Housing dust-splash-proof | 16 | 3.6.12 | DIP | 4 things. | 0.1 | 2 | neutral | 190 | — | — | 30v | AC/DC | 3 short circuit | |||
RP21-solder block
#14286
|
26485 | СНГ | 1634 шт |
25 грн.
|
Relay block RP21 for fastening to the panel using screws with rear connection of conductors by soldering. | 10.5 | — | DIP | 120pcs | — | — | — | — | — | — | — | — | — | |||
| 23987 | СНГ | 1032 шт |
30 грн.
|
Relays RES-85 RS4.569.794-01 are dust-splash-proof, two-position, single-stable, reed switches, designed for switching direct and alternating current with a frequency of up to 100 kHz. Working voltage V: 16-30 | 34 | 27 | — | 5 pieces. | 0.2 | 1 | neutral | 3000 | — | — | 60v | — | 3 short circuit | ||||
Relay RP21-200-UHL4~220V
#9879
|
21659 | СНГ | 790 шт |
100 грн.
|
2 closing. Contact current: 6A Rated voltage: ~220V | 50 | 220 | DIP | 5 pieces. | 6 | 1 | neutral | — | 0.4A | — | 500v | Variable | 2 short circuit | |||
Relay RMug HP4.523.421
#11692
|
23921 | СНГ | 764 шт |
65 грн.
|
Relay RMug HP4.523.421 is hermetically sealed, single-stable, powered by direct current, designed for switching electric circuits of direct and alternating current with a frequency of 50-400 Hz. | 140 | 12 | DIP | 70pcs | 1 | 1 | neutral | 107 | — | — | 300v | Constant | 4 switches | |||
| 27693 | СНГ | 746 шт |
25 грн.
|
4.5 | 27 | DIP | 10 pieces. | 0.5 | 1 | neutral | 1880 | — | — | 36v | AC/DC | 1 switch | |||||
| 28889 | СНГ | 615 шт |
60 грн.
|
Rated voltage 27 V Voltage range 22 - 36 V Winding resistance 1580 - 2185 Ω Response time 3 ms Release time 2 ms Trigger current 8 mA Release current 1.6 mA. | 3 | 27 | DIP | 48pcs | 1 | 1 | neutral | — | — | — | — | Constant | 1 switch | ||||
| 21662 | СНГ | 471 шт |
26 грн.
|
Relay REK-21 DLT4.569.002-01 electromagnetic sealed. Designed for switching electrical circuits of direct and alternating current with a frequency of up to 10,000 Hz. The relay has two contact groups for switching. Switches currents up to 2 A at a voltage of 0.05-150 V. Powered by a 12V direct current source. Dimensions 20.5x10.5x16.3 mm (max.). | 7.5 | 12 | DIP | 20pcs | 2 | 1 | neutral | 130 | 42mA | 4mA | 150v | Constant | 2 switches | ||||
| 27701 | СНГ | 443 шт |
25 грн.
|
4.5 | 27 | DIP | 10 pieces. | 0.5 | 1 | neutral | 1880 | — | — | 36v | AC/DC | 1 switch | |||||
RP21-block-screw(pl)-002
#9878
|
21657 | — | 421 шт |
35 грн.
|
— | — | — | — | — | — | — | — | — | — | — | — | — | — | |||
| 24279 | СНГ | 412 шт |
25 грн.
|
4.5 | 5 | DIP | 10 pieces. | 0.5 | 1 | neutral | 67 | — | — | 36v | AC/DC | 1 switch | |||||
| 23988 | СНГ | 411 шт |
30 грн.
|
CONNECTING BLOCK WITH MOUNTING PARTS FOR RELAY RP-7. | 22 | — | DIP | 10 pieces. | — | — | — | — | — | — | — | — | — | ||||
| 24281 | СНГ | 381 шт |
18 грн.
|
13 | 10 | DIP | 4 things. | 0.1 | 1 | neutral | 760 | — | — | 30v | Constant | 2 short circuit | |||||
Relay RPS36A RS4.520.268
#13828
|
26006 | СНГ | 370 шт |
712 грн.
|
Relay RPS-36A RS4.520.268 is sealed, polarized, two-stable, two-position, with six changeover contacts, designed for switching DC and AC electrical circuits with a frequency of up to 1100 Hz. | 50 | 24…32 | — | 6pcs | 3 | 4 | polarized | — | — | — | 220v | — | 6 shifts | |||
| 24016 | СНГ | 351 шт |
30 грн.
|
CONNECTING BLOCK WITH MOUNTING PARTS FOR RELAY RP-4. | 22 | — | DIP | 10 pieces. | — | — | — | — | — | — | — | — | — | ||||
Relay RPS5 RS4.522.307
#13830
|
26008 | СНГ | 288 шт |
800 грн.
|
Relay RPS-5 RS4.522.307 sheathed, polarized, designed for switching DC electrical circuits. Relays RPS-5 are three-position, single-stable, comply with the requirements of GOST 16121-86 and technical specifications DEG0.452.000TU. Specifications. The supply current of the windings is constant. Insulation resistance between current-carrying elements, between current-carrying elements and the case, MOhm, not less than: - in normal climatic conditions (windings de-energized) - 100 - in conditions of high humidity - 10 - at maximum temperature (after holding the windings under operating current) - 100 Test alternating voltage, V: - under normal climatic conditions: - between current-carrying elements and the case, between windings and contacts, between windings - 500 - between contacts - 300 - in conditions of high humidity: - between current-carrying elements and housing, between windings and contacts, between windings - 300 - between contacts - 180 - at reduced atmospheric pressure: - between current-carrying elements and the case, between windings and contacts, between windings - 250 - between contacts - 200 The time of continuous exposure of the windings under the operating current at a temperature of -60 and +70 ° C, atmospheric pressure from 130 to 103,900 Pa - 200 hours. Contact material - PlRD-10. Electrical contact resistance 1 ohm. | 230 | — | DIP | 1 PC. | — | — | polarized | — | — | — | — | Constant | 1 switch | |||
| 27703 | СНГ | 210 шт |
25 грн.
|
4.5 | 5 | DIP | 10 pieces. | 0.5 | 1 | neutral | 67 | — | — | 36v | AC/DC | 1 switch | |||||
| 27694 | СНГ | 175 шт |
25 грн.
|
4.5 | 27 | DIP | 30pcs | 0.5 | 1 | neutral | 1880 | — | — | 36v | AC/DC | 1 switch | |||||
| 23350 | СНГ | 135 шт |
60 грн.
|
Sheathed, two-position, single-stable, with four changeover contacts DC relay, designed for switching DC and AC electrical circuits with a frequency of 50 ... 1000 Hz. | 34 | 60 | DIP | 10 pieces. | 0.3 | 1 | neutral | 2700 | — | — | 500v | Constant | 4 switches | ||||
Relay REK24 YAL4.550.023
#13829
|
26007 | СНГ | 114 шт |
430 грн.
|
The REK-24 YAL4.550.023 relay is sealed, single-stable, two-position, with two changeover contacts, designed for switching DC and AC electrical circuits with a frequency of up to 10,000 Hz. Relay REK-24 complies with the requirements of GOST 16121-86 and specifications YAL0.455.015TU. Technical characteristics of the REK-24 relay: The winding supply current is constant. Insulation resistance between current-carrying elements, between current-carrying elements and the case, MOhm, not less than: - in normal climatic conditions (the winding is de-energized) - 200 - at the maximum temperature - 20 - under conditions of high humidity: - between contacts, between contacts and case - 10 - between the winding and the body - 5 Test alternating voltage between current-carrying elements, between current-carrying elements and the case, V: - in normal climatic conditions (the winding is de-energized) - 500 - in conditions of high humidity - 300 - at reduced atmospheric pressure - 200 Relay weight, not more than: - 50 g - versions without flange REK-24 (YAL4.550.023, -02, -06, -08, -10); - 55 g - versions with REK-24 flange (YAL4.550.023-01, -03, -07, -09, -11) Contact material - SrPlMg20-0.3, coating - Zl1tv. Electrical contact resistance is not more than 0.8 Ohm. | 43 | 27 | — | 10 pieces. | 3 | 1 | neutral | — | — | — | 220v | Constant | 2 switches | |||
| 27696 | СНГ | 77 шт |
25 грн.
|
4.5 | 6 | DIP | 10 pieces. | 0.5 | 1 | neutral | 95 | — | — | 36v | AC/DC | 1 switch | |||||
| 29268 | СНГ | 67 шт |
25 грн.
|
4.5 | 6 | DIP | 10 pieces. | 0.5 | 1 | neutral | 95 | — | — | 36v | AC/DC | 1 switch | |||||
| 21658 | СНГ | 59 шт |
100 грн.
|
2 make, 1 break. Contact current: 6A Rated voltage: ~220V | 40 | 220 | DIP | 5 pieces. | 6 | 1 | neutral | — | — | — | 500v | Variable | 2 short circuit 1 break. | ||||
| 26010 | СНГ | 58 шт |
1,500 грн.
|
EMRV-27B-1 0.8-3 sec electric machine time relay is designed for switching electrical circuits with certain pre-set time delays and is used in industrial equipment for various purposes, to obtain time delays in industrial automation circuits and relay protection. Assigned resource 10,000 operations, with a time delay less than or equal to 27s; 75h - with time delay over 27s Main technical characteristics: DC supply voltage, V 27 ± 2.7 Supply voltage ripple amplitude, no more than 1% of the supply voltage value Current consumption at temperatures from 15°C to 70°C, A, not more than with the engine on 0.55, after the engine is stopped 0.40 Insulation resistance during the service life, kOhm, not less than 20. | 400 | — | — | 1 PC. | — | — | — | — | — | — | — | — | — | ||||
Relay RP-5 RS4.522.000
#13746
|
25914 | СНГ | 32 шт |
5,000 грн.
|
Relays RP-5 RS4.522.000 sheathed, polarized, with one switching element, designed for switching DC electrical circuits. | 180 | 23…30 | DIP | 8pcs | 0.2 | 2 | polarized | 1600 | — | — | — | Constant | 1 switch | |||
| 28890 | СНГ | 26 шт |
80 грн.
|
Rated voltage 27 V Voltage range 22 - 36 V Winding resistance 1580 - 2185 Ω Response time 3 ms Release time 2 ms Trigger current 8 mA Release current 1.6 mA. | 3 | 27 | DIP | 48pcs | 1 | 1 | neutral | — | — | — | — | Constant | 1 switch | ||||
| 27702 | СНГ | 20 шт |
25 грн.
|
4.5 | 5 | DIP | 5 pieces. | 0.5 | 1 | neutral | 67 | — | — | 36v | AC/DC | 1 switch | |||||
| 27705 | СНГ | 18 шт |
25 грн.
|
4.5 | 3 | DIP | 5 pieces. | 0.5 | 1 | neutral | 35 | — | — | 36v | AC/DC | 1 switch | |||||
| 26051 | СНГ | 15 шт |
1,500 грн.
|
EMRV-27B-1 0.6-2s electric machine time relay is designed for switching electrical circuits with certain pre-set time delays and is used in industrial equipment for various purposes, to obtain time delays in industrial automation circuits and relay protection. Assigned resource 10,000 operations, with a time delay less than or equal to 27s; 75h - with time delay over 27s Main technical characteristics: DC supply voltage 27 ± 2.7 Supply voltage ripple amplitude, no more than 1% of the supply voltage value Current consumption at temperatures from 15°C to 70°C, A, not more than with the engine on 0.55, after the engine is stopped 0.40 Insulation resistance during the service life, kOhm, not less than 20. | 400 | — | — | 1 PC. | — | — | — | — | — | — | — | — | — |
