DC-DC boost converter 10...32V to 35...60V 120W (5A max.)

This module is a high power and reliable DC voltage converter that is designed to regulate the output voltage. Thanks to its good parameters, the voltage converter can be used in various fields. The module can be used as a power source for various LEDs, charging various portable devices, etc.

The output voltage is adjusted using a trimmer resistor. The variable resistor must be calibrated before connecting the instrument to the DC voltage converter. The microcircuit already has an installed heatsink. The maximum power of the voltage converter is 120W. If the output power of the module exceeds 80 W, then the existing heatsink must be replaced with a more powerful additional cooling. The maximum output current is 5 A, the efficiency (coefficient of performance) of the converter is up to 90%. At an ambient temperature of 40 °C, it is recommended to install additional cooling for the inverter. The module is not protected against short circuit (short circuit) and reverse polarity.

An external power source and the device are connected to the voltage converter using screw terminal blocks. Terminal designations:

IN+: input voltage 10-32V
IN-: "ground"
OUT+: output voltage 35 - 60 V
OUT-: device common wire
Powered by an unregulated external power supply. The DC input voltage range of the converter is from 10 to 32 V, and the output voltage range is from 35 to 60 V. The red LED, which is connected to the power buses, indicates power supply to the module.

Converter Specifications:

Input voltage, V 10 ... 32
Output voltage, V 35 ... 60
Maximum output power, W 80 (120 with additional cooling)
Efficiency, % 90
Maximum output current, A 5
No-load consumption current, mA 25
Voltage regulation, % 0.5
Load regulation, % 2.5
Output ripple, % 2
Operating temperature range, °C -40 ... +85
Module dimensions, mm 65 x 47 x 23.5.